yes, but it will slide over the years so I would not
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
Floating an engineered wood flooring is done using an underlay between the sub floor and the new floor and then the engineered flooring is laid over the top and glued at the tongue and grooves to keep it together. if the flooring is a click joint then gluing is not required.
Yes, but you should you use an adhesive that is ductile
of corse you can! it's not common practice but if your floor is sound it should be fine
You shouldn't. You need a surface that will allow the adhesive to make a good bond to. There are different types, read the instructions for the one you buy and apply it to the recommended sub floor.
Yes, but it would have to be floating engineered wood.
Absolutely.
If it sits over a cement floor, then no. If it is a nailed down floor, then you can, but you still have to install a cement board.
Floating an engineered wood flooring is done using an underlay between the sub floor and the new floor and then the engineered flooring is laid over the top and glued at the tongue and grooves to keep it together. if the flooring is a click joint then gluing is not required.
Yes, but you should you use an adhesive that is ductile
Ceramic. Ceramic.
of corse you can! it's not common practice but if your floor is sound it should be fine
The engineered flooring can be either floated above or glued to the concrete.
You can glue the tile down, only concern is there enough room for the door to clear the tile?
You shouldn't. You need a surface that will allow the adhesive to make a good bond to. There are different types, read the instructions for the one you buy and apply it to the recommended sub floor.
Engineered wood floor is essentially a thin wood veneer over a plywood substrate. It is much better than just a normal floor because it is more durable.
Yes