answersLogoWhite

0

If you cant get the existing flooring up, or if lifting it would cause more damage to the substrate then its worth, then yes i would suggest doing this and it is common practice.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Engineering

Can you put osb board on top of concrete so that carpet can be laid on top of it?

Not really a good idea. The water over time from the concrete will cause the board damage. If you use a good pad there is no reason you cannot lay the carpet over concrete.


Can you lay asphalt over concrete?

Yes, you can lay asphalt over concrete, but it's important to prepare the concrete surface properly. The concrete should be clean, free of debris, and in good condition without major cracks or damage. A bonding agent may also be applied to enhance adhesion between the two surfaces. Additionally, proper drainage should be ensured to prevent water from pooling, which can lead to issues with the asphalt layer.


Can you lay wet concrete on dry concrete?

This may be possible if you prep the dry concrete with a latex bonding agent.


How do you properly install floor safe into concrete?

This all depends on the floor. Concrete that is level is a wonderful substrate for many types of flooring. * Ceramic or porcelain tile: are great on concrete. In fact it is the preferred substrate. Laid on a level floor with a good latex fortified thinset, you should expect this floor to last a lifetime. * Vinyl: Another great floor for concrete. Glued directly to the floor you really don't need to do much special. The surface needs to be free of defect, as any will show through to the surface. Today there are great vinyl floors that look like wood (not a perfect representation mind you) that you can put onto a water or moisture prone area like basements. * Wood: With wood you do have some limitations. You cannot lay a solid wood floor over concrete. You also cannot put solid wood subgrade (below the soil line of the outside of your house, basements, sunken living rooms etc). You can though lay an engineered wood onto concrete, even subgrade. Engineered wood is plywood with real wood planking atop. These are laid with a high quality latex or urethane based glue. * Floating Wood or Laminate: Like a lot of floors, floating floors must have a very level substrate. 1/8" in a 6' radius is the standard idea. If you have a substrate level enough, you should be good to go. Most pads for laminate or wood are already a moisture barrier. If it is not, or the pad is attached to the floor already you need to lay 6 mil rolled plastic over the entire floor. Beyond that, the floor should be very similar to installing onto a wood subfloor.


Can you lay tile over concrete that is sealed?

Yes, you can lay tile over sealed concrete, but it requires proper preparation. First, you should clean the surface thoroughly to remove any dust, grease, or contaminants that could hinder adhesion. Additionally, it's advisable to use a suitable primer or an appropriate thin-set mortar designed for sealed surfaces to ensure a strong bond. Always check the manufacturer's recommendations for both the tile and the adhesive for best results.

Related Questions

How can I install vinyl flooring over concrete?

To install vinyl flooring over concrete, first ensure the concrete is clean and level. Apply a moisture barrier if needed. Then, lay down a plywood subfloor and secure it to the concrete. Finally, install the vinyl flooring according to the manufacturer's instructions.


How to lay sheet vinyl flooring on concrete?

To lay sheet vinyl flooring on concrete, first clean and level the concrete surface. Apply adhesive to the concrete, then lay the vinyl sheet carefully, smoothing out any air bubbles. Trim excess vinyl and allow the adhesive to dry completely before walking on the floor.


Can you lay vinyl flooring over tile?

Yes, you can lay vinyl flooring over tile as long as the tile is in good condition and the surface is clean and smooth.


How to lay vinyl sheet flooring on concrete effectively?

To effectively lay vinyl sheet flooring on concrete, start by cleaning and leveling the concrete surface. Apply a primer to help the adhesive bond better. Cut the vinyl sheet to fit the room, leaving a small gap around the edges for expansion. Apply adhesive to the concrete and carefully lay the vinyl sheet, smoothing out any air bubbles. Use a roller to ensure a secure bond. Allow the adhesive to dry completely before walking on the floor.


Can you lay vinyl plank flooring over tile?

Yes, you can lay vinyl plank flooring over tile as long as the tile is in good condition and the surface is smooth and level. It is important to properly prepare the tile surface before installation to ensure the vinyl planks adhere correctly.


What should I lay under vinyl flooring?

You should lay a smooth and level subfloor under vinyl flooring to ensure a proper installation and prevent any imperfections from showing through the vinyl.


How can I effectively lay vinyl over tile flooring?

To effectively lay vinyl over tile flooring, you should first clean and smooth the tile surface, then apply a self-leveling underlayment if needed. Next, measure and cut the vinyl to fit the space, and use adhesive or a floating installation method to secure the vinyl over the tile. Finally, trim any excess vinyl and seal the edges for a finished look.


How can I install vinyl sheet flooring on concrete?

To install vinyl sheet flooring on concrete, first clean and level the concrete surface. Then, apply a primer to help the adhesive bond. Cut the vinyl sheet to fit the room, leaving a small gap around the edges. Apply adhesive to the concrete and lay the vinyl sheet down, smoothing out any air bubbles. Trim any excess material and allow the adhesive to dry completely before walking on the floor.


Can you lay vinyl flooring on top of another vinyl floor?

yes but only up to 3 layers


How can I install a vinyl floor over tile?

To install a vinyl floor over tile, you will need to thoroughly clean and level the tile surface, apply a primer specifically designed for use with vinyl flooring, and then lay the vinyl planks or tiles according to the manufacturer's instructions. It is important to ensure that the tile surface is smooth and free of any debris before installing the vinyl flooring.


How can I install vinyl plank over tile flooring?

To install vinyl plank over tile flooring, you will need to clean and level the tile surface, apply a primer if necessary, and then lay down the vinyl planks using a click-and-lock or adhesive method. Make sure to follow the manufacturer's instructions for the best results.


Can you lay new vinyl on top of old vinyl?

Not a good idea, the old pattern will show through and the finish on the old flooring will try to let go of the adhesive over time.,