Yes, but you will need to reinforce with a wire mesh and then pour.
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
can we use polypropline fibre in concrete
No do to the concrete settling the concrete on top would split
Yes, you can lay asphalt over concrete, but it's important to prepare the concrete surface properly. The concrete should be clean, free of debris, and in good condition without major cracks or damage. A bonding agent may also be applied to enhance adhesion between the two surfaces. Additionally, proper drainage should be ensured to prevent water from pooling, which can lead to issues with the asphalt layer.
Asphalt concrete is not considered organic; it is primarily composed of aggregates (such as crushed stone, gravel, or sand) and asphalt binder, which is a byproduct of petroleum refining. While asphalt binder contains hydrocarbons, which are organic compounds, the overall composition of asphalt concrete is classified as inorganic due to its mineral aggregate content. Therefore, it is primarily a synthetic material used in road construction and paving.
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
12 inchesmaximum asphalt pavement thickness allowed for an asphalt over soil instalation. 12 inches.
POUR THE CONCRETE OVER THE BRICK
To attach concrete to asphalt, ensure the asphalt surface is clean, free of debris, and in good condition. Apply a bonding agent or adhesive specifically designed for this purpose to promote adhesion between the two materials. Pour the concrete while the bonding agent is still wet, and use a trowel to smooth the surface. Allow the concrete to cure properly, ensuring a strong bond is formed.
pour more concrete over the top and smooth it out
My driveway has a ton of cracks in it, and I bought some concrete sealer, but my driveway is asphalt! Will the concrete sealer still work with asphalt?
Saleh H. Swailmi has written: 'Development of a test procedure for water sensitivity of asphalt concrete mixtures' -- subject(s): Asphalt concrete, Asphalt concrete Pavements, Pavements, Asphalt concrete, Testing
can we use polypropline fibre in concrete
Concrete is harder than asphalt because asphalt breaks easier than concrete does on roads, etc.
No do to the concrete settling the concrete on top would split
AC is an abbreviation for asphalt. The terms "asphalt (or asphaltic) concrete", "bituminous asphalt concrete" and the abbreviation "AC" are typically used only in engineering and construction documents and literature. ASPH or AP is the abbreviation of Asphalt.
Yes, you can lay asphalt over concrete, but it's important to prepare the concrete surface properly. The concrete should be clean, free of debris, and in good condition without major cracks or damage. A bonding agent may also be applied to enhance adhesion between the two surfaces. Additionally, proper drainage should be ensured to prevent water from pooling, which can lead to issues with the asphalt layer.