0
What else can I help you with?
How do you convert Amps to KVA for a single phase system?
use 1.0 as your PF Understand that K=1000, so KVA simply means thousands of volts times amps. First, multiply KVA by 1000 to get VA, then divide by the voltage of the system to get amps. Example: 6KVA, 240V single-phase. 6 * 1000 = 6000 VA 6000 / 240 = 25A
Convert 800kvar to kw?
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
How many hp can we run with 3 phase by62.5kva genset?
To convert kVA to horsepower (hp), you can use the formula: 1 kVA = 0.746 kW, and then 1 kW = approximately 1.341 hp. A 62.5 kVA generator can produce about 50 kW (62.5 kVA × 0.8 power factor). Therefore, the generator can provide roughly 67 hp (50 kW × 1.341 hp/kW).
Single phase 10hp motor how much kva generator needed?
10 HP is 7.46 kW theoretically, but allowing for an 0.7 power factor the kVA goes up to 10.5 kVA. Add 20% for sundry losses and you get 12.5 kVA
Which is to consider in sizing generator kva or kw ratins?
the unit of generators power is KVA becoze the kva is the power that contain the active power (KW) and the reactive power mean that the name plate of any generator must contain the rated kva of it (like the transformer P (KW) = P (kva) * cos fi P (KW) = V I cos fi for single phase P (KVA) = V I when cos fi closed to 1 this will increase the useful power that exit from the generator or transformer with my pleasure
Convert 2KW to KVA in single phase?
To convert 2 kW to kVA in single phase, you need to know the power factor. If we assume a power factor of 0.8 (common for many single-phase loads), the conversion formula is kVA = kW / power factor. Therefore, for 2 kW at a power factor of 0.8, the result would be 2 kVA / 0.8 = 2.5 kVA.
How can you convert the kva rating into kw rating?
kva*cos(phase angle)
Convert the kva into the kw?
It is less confusing if we capitalize the units as required. 1 kVA = 1 kW, as originated from power [W] = current [A] * voltage [V]. The 'k' means 'times 1000'. The statement can be re-written as 1000 VA = 1000 W.
How do you convert Amps to KVA for a single phase system?
use 1.0 as your PF Understand that K=1000, so KVA simply means thousands of volts times amps. First, multiply KVA by 1000 to get VA, then divide by the voltage of the system to get amps. Example: 6KVA, 240V single-phase. 6 * 1000 = 6000 VA 6000 / 240 = 25A
Is it possible to convert a 2.4 kw single phase appliance to a 9kw 3 phase appliance?
No, it is not possible to convert a 2.4 kw single phase appliance to a 9kw 3 phase appliance. Single phase can not be converted to three phase with out considerable cost involved.
Why transformer rated in kva instead of kw?
KW is multiplication of KVA and power factor. Power factor is load dependent and varies as per the type of load. Hence the rating or capacity is mentioned in KVA not in KW
Convert 800kvar to kw?
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
How many hp can we run with 3 phase by62.5kva genset?
To convert kVA to horsepower (hp), you can use the formula: 1 kVA = 0.746 kW, and then 1 kW = approximately 1.341 hp. A 62.5 kVA generator can produce about 50 kW (62.5 kVA × 0.8 power factor). Therefore, the generator can provide roughly 67 hp (50 kW × 1.341 hp/kW).
How to convert from kV into kW?
Multiply by Amps.
How do convert KVA to KW?
kVA = kW divided by (power factor). The power factor is the cosine of the angle between voltage and current.
How do you change ac tonnage to kva and kw?
To convert AC tonnage to kVA and kW, use the following formulas: For kVA: kVA = (tonnage x 3.517) For kW: kW = (tonnage x 3.517 x power factor). Remember to consider the power factor of the system when converting from tonnage to kVA and kW.
Single phase 10hp motor how much kva generator needed?
10 HP is 7.46 kW theoretically, but allowing for an 0.7 power factor the kVA goes up to 10.5 kVA. Add 20% for sundry losses and you get 12.5 kVA
