Current is coulombs per second.
A: A stepper motor move a step at the time. If you know the steps then you will know the speed per tum. The motor need current pulses with a fast rise time the width is immaterial once moved
It can be said that capacitors pass alternating current but block direct current. Coupling capacitors at the input and output of a circuit isolate the direct current within that circuit from the input circuit and the output circuit, respectively. Only the input signal is allowed in, and only the output signal is allowed out.
Settling Time and the Real roots of a system are related reciprocally.
I suspect that you mean that you want to define constants, which is not possible in Python. Any variable can be rebound to something else at any time.
an inverse time protective device is a protective relay with definite minimum operating current and definite minimum operating time for a given current. the device will ensure that increasing current in a fault, that the operating time will be decreased. Preventing an overload.
The alternating current refers to the flow of the electric charge periodically and in the opposite direction. The polarity changes with the time..
"Tomorrow" refers to the day following today, in relation to time. It is the day that comes after the current day.
The motion of an object can be described by its speed - how fast it is moving, its velocity - the speed and direction of its movement, and its acceleration - how its speed or direction is changing over time. These elements help define the object's motion in relation to time and space.
it is a small time period that you and the person in your relation ship stop and think about how your relation ship is going then you decide if you want to keep your relation ship or not. it is the time to think about your relation ship basically.
the relation between frequency and time period is ''t=1/f''
Time delay protective relays used in the power industry can be time over current or voltage, or definite time over / under voltage / over current.Definite time type relays use an over / under voltage / current element that picks up when voltage / current reach a specified level. When this picks up, a timer is started. If current / voltage stays above / below the pickup value for long enough to allow the timer to expire, the relay trip contacts are closed.Time over current elements use an inverse time - current curve to define speed of operation, so the more current is present, the faster the relay will operate.
gear and clutch relation _ when clutch is disconnect this time gear shifting thats relation
The relation is:P = I2RWhere:I is the current (for example, in amperes)R is the resistance (for example, in ohms)P is the power (energy per second) converted from electrical energy to heat. If the current is in amperes and the resistance in ohms, then power is in watts (equal to joules/second).
The five fundamental quantities are mass, length, time, electric current, and temperature. These quantities form the basis of the International System of Units (SI) and are used to define all other derived quantities.
The relationship between amperage and capacitance is indirect. Capacitance stores and releases electrical energy, affecting the flow of current in a circuit. Higher capacitance can lead to slower changes in current (i.e., lower frequency), while lower capacitance can result in faster changes in current.
When people have a hard time.
adsfasdf