0
What else can I help you with?
Can you use pressure assisted toilets with well systems?
Yes you can but WHY? there are some really great graviety flush toilets out there for less then half the price of pressure assisted and work a lot better plus they are quiet and easy to repair
Is it better to have wall to wall carpeting in the basement or just a concrete floor?
There is nothing wrong with installing carpeting in the basement. There may be types of carpeting that work better with humidity in the basement. Be sure that your basement is sealed to keep water out before installing.
Saniflo toilets How does it work and how much space do you need?
Saniflo toilets function basically the same way a "normal" toilet works - you flush, but then the waste goes into a pump where it's macerated or grinded and then pumped up or over to your sewer line. These are great for basement bathrooms where you would normally have to either break the concrete or build a platform. Saniflo systems allow you to place the toilet right on the floor and you don't have to break concrete! As far as space goes, that depends on what type of bathroom you are planning - full bath with a shower/tub or a half bath with just a sink and a toilet. The pump itself doesn't take up any room as it sits behind the toilet, so if you have room for a toilet you have room for a Saniflo! www.SanifloStore.com
Moisture in basement?
Although basement moisture can be fueled by water leakage, it is usually an atmospheric condition caused by humidity rising as warm air cools and shrinks in the cooler basement area. Dehumidifiers work well to control this.
How do Contrac toilets compare to toto?
Generally Contrac toilets are much more expensive than the same level Toto and do not work any better. I have fitted hundreds of Toto and believe they are the best toilet for the money you pay.
How do dual flush toilets work to conserve water usage?
Dual flush toilets work by offering two different flushing options - a full flush for solid waste and a reduced flush for liquid waste. This allows users to choose the appropriate amount of water needed for each flush, helping to conserve water usage by using less water for lighter waste.
How do push button toilets work and what are the benefits of using them?
Push button toilets work by using a dual-flush system that allows users to choose between a full flush and a half flush, depending on the amount of waste being disposed. The benefits of using push button toilets include water conservation, as the half flush option uses less water, and improved efficiency in waste removal.
How does the dual flush toilet system work and what are its benefits compared to traditional toilets?
The dual flush toilet system has two buttons for flushing, one for liquid waste and one for solid waste. This allows users to choose the appropriate amount of water for each flush, saving water and reducing water bills. Compared to traditional toilets, dual flush systems are more environmentally friendly and cost-effective in the long run.
How much water goes down the toilet when you flush?
Generally, modern toilets are required to be low flow, which is 1.6 gallons (6L) per flush. Older toilets were 3 gpf (11L). Modern toilets vary in the amount of water required to flush them, from 6L to 3L. Some have a dual flush system allowing solids (faeces) to be flushed with a full volume flush, say of 6 or 4.5L, and liquids (urine) to be flushed with a smaller volume flush of about 3L. It is not possible to flush properly a toilet with less water than that with which it was designed to be flushed. Low volume flush toilets have been designed to work efficiently with a smaller volume of water.
How do up flush toilets work?
Up flush toilets send waste upwards to another, larger drain, as opposed to downwards. They're often used in basements when no sub-basement plumbing is available. For more information, visit http://www.decorisland.com.
How does the push button flush mechanism work in modern toilets?
The push button flush mechanism in modern toilets works by using a system of valves and levers to release water from the tank into the bowl when the button is pressed. This action creates a siphon effect that efficiently flushes waste down the drain.
How does the dual flush toilet button work to help conserve water usage?
The dual flush toilet button works by giving users the option to choose between a full flush for solid waste and a half flush for liquid waste. This helps conserve water by using less water for lighter waste, reducing overall water usage.
How do salt water toilets work on boats and ships?
Salt water toilets on boats and ships use seawater to flush waste instead of fresh water. The seawater is pumped into the toilet bowl to flush away waste, which then gets discharged overboard. This system helps conserve fresh water on the vessel.
Can you use pressure assisted toilets with well systems?
Yes you can but WHY? there are some really great graviety flush toilets out there for less then half the price of pressure assisted and work a lot better plus they are quiet and easy to repair
How does a push button flush toilet work and what are its advantages over traditional flush mechanisms?
A push button flush toilet works by using a button on the top of the tank to release water into the bowl for flushing. The button activates a mechanism that opens a valve to allow water to flow into the bowl. The advantages of a push button flush toilet over traditional flush mechanisms include: Water efficiency: Push button flush toilets often have dual flush options, allowing users to choose a full or partial flush, saving water. Customizable flushing power: The push button allows for more control over the amount of water used for flushing, reducing water waste. Modern design: Push button flush toilets have a sleek and modern appearance, adding a contemporary touch to the bathroom. Easy to use: The push button is user-friendly and requires less effort to operate compared to traditional flush handles.
What is the purpose of a dual flush toilet and how does it work?
A dual flush toilet is designed to save water by offering two flushing options: a low-volume flush for liquid waste and a higher-volume flush for solid waste. This allows users to choose the appropriate flush for the type of waste, reducing water usage overall. The toilet works by having two separate flush buttons or handles that control the amount of water released during flushing.
Do toilets flush without electricity?
Well....it should. My toilet, for one, works when the power is out. I mean, any toilet now should work. So, this is probably an old question.
