0
What else can I help you with?
What type of connection do you need to join gas pipe?
A male and female thread connection if metal pipe. If poly pipe a welded fusion connection.
What insulation should you use for a cold water pipe?
poly venal chloride
How do you clamp a poly pipe?
To clamp a poly pipe, first, ensure the pipe ends are cut cleanly and aligned properly. Slide a fitting or clamp over the pipe, then push the pipe into the fitting until it is fully seated. If using a hose clamp, position it over the connection and tighten it securely with a screwdriver or wrench, ensuring a snug fit without over-tightening to avoid damaging the pipe. Finally, check for leaks by running water through the system.
What is the maximum pressure of a 1.250 pipe?
depends on the pipe like if its copper its rated at 300 psi 200 degree F pvc is rated at 200 psi schedule 40 if its black poly it would be 200 psi most all pipes have it on the side of the pipe ,pressure and degrees.
Difference between CI poly and FS poly?
A CI poly asks questions centered around espionage, sabotage, disclosure of classified material, etc. A lifestyle Poly focuses on items related to your personal life. A FullScope Poly is a combination of the above.
How much water can you pump through 4 poly pipe at a distance of 2000' and a pressure of 150 psi?
The flow rate of water through a 4-inch poly pipe can vary based on factors like the pipe's smoothness, elevation changes, and fittings. However, under optimal conditions at 150 psi, a 4-inch poly pipe can typically deliver around 1,000 to 1,500 gallons per minute (GPM) over a distance of 2,000 feet. It's essential to consider head loss due to friction and fittings, which could reduce the effective flow rate. Consulting specific flow rate charts or hydraulic calculations would provide more precise estimates for your conditions.
What is the full form of PPR pipe?
Poly Propylene Random pipe
Can termites eat poly pipe used in swimming pools?
Termites can and do attack (eat) poly pipe used in pools. Before a homeowner uses poly pipe, it is suggested that they contact the poly pipe manufacturer since studies and the factory specs clearly establish it. I have seen termites repeatedly damage self installed poly pipe on an in ground pool. If poly pipe is used, it is absolutely mandatory that the surrounding soil be be treated for termites.
What is the best way to connect a PVC pipe to a poly pipe using a PVC to poly adapter?
To connect a PVC pipe to a poly pipe using a PVC to poly adapter, the best way is to follow these steps: Cut the PVC pipe and poly pipe to the desired lengths. Clean and prepare the ends of both pipes. Apply primer and cement to the PVC pipe and the adapter. Insert the PVC pipe into one end of the adapter and hold in place for a few seconds. Repeat the process for the poly pipe on the other end of the adapter. Allow the cement to dry and set before using the connected pipes. This method ensures a secure and leak-proof connection between the PVC and poly pipes.
What type of pipe can be used for underground gas line?
Coated Copper Pipe that is approved for underground only.
What is hpvc pipe?
hardened poly vinyl chloride
What is the scientific name for PVC pipe?
The scientific name for PVC pipe is polyvinyl chloride.
What type of connection do you need to join gas pipe?
A male and female thread connection if metal pipe. If poly pipe a welded fusion connection.
What are the benefits of using poly pipe irrigation for agricultural purposes?
Poly pipe irrigation offers several benefits for agricultural purposes. It is cost-effective, durable, and easy to install. Additionally, poly pipe is flexible, allowing for efficient water distribution and reduced water wastage. Its resistance to corrosion and chemicals makes it a long-lasting option for irrigation systems.
What pipe sizes are used in the natural gas network?
Normally erw pipes having the sizes of 1/2, 3/4, 1, 2 inch etc also Poly ethylene pipe having the size of dia of 20mm,32mm,60mm,90mm,125mm etc
What insulation should you use for a cold water pipe?
poly venal chloride
What is an MIP adapter?
Male Iron Pipe Adapter. This means it has male pipe threads and will adapt to either PVC pipe, Poly pipe or a few other types of pipe to make a transition from threaded pipe to something else.
