0
What else can I help you with?
What is nozzle schedule xs?
Nozzle schedule XS refers to a specific set of wall thicknesses for piping, particularly in the context of piping systems made from materials like carbon steel. It is part of a classification system that includes various schedules (like Schedule 40, 80, etc.) to denote the thickness and pressure ratings of pipes and fittings. A nozzle schedule XS typically indicates heavier wall thicknesses compared to standard schedules, allowing for higher pressure handling and durability in applications. This is often used in industrial settings, such as oil and gas, where robust piping is essential.
Can you use galvanized connections on gas iron pipe?
Most codes do not allow Galvanized piping/fittings on gas piping. I have used galvanized pipe/fittings on exterior gas piping before in the state of Michigan but other states do not allows this. Check with your local code authorities.
Can you use white teflon tape on natural gas piping?
Yes, you can. You could also use pipe dope, according to my dad. He works for infra source installing natural gas piping.
Codes about using teflon tape to install gas piping?
There are approved Teflon tapes for "gas" but it depends on the HJA and what type of "gas" your asking about
Is ppr pipe can be use for gas piping system?
No, PPR (Polypropylene Random Copolymer) pipe is not suitable for gas piping systems. It is primarily designed for hot and cold water distribution and is not approved for transporting gas due to its inability to withstand the pressures and potential chemical reactions associated with gas. For gas piping, materials like steel, copper, or specific types of plastic such as polyethylene (PE) are recommended. Always consult local regulations and codes for proper materials in gas applications.
What materials are suitable for forming gas piping or dissociated ammonia gas piping?
Piping material used for forming gas would be 316L stainless steel.
What should rooftop gas piping be?
Galvanized piping or painted depending on local codes and type of fuel (gas) NO drip legs where the piping is subject to freeze ups
What is nozzle schedule xs?
Nozzle schedule XS refers to a specific set of wall thicknesses for piping, particularly in the context of piping systems made from materials like carbon steel. It is part of a classification system that includes various schedules (like Schedule 40, 80, etc.) to denote the thickness and pressure ratings of pipes and fittings. A nozzle schedule XS typically indicates heavier wall thicknesses compared to standard schedules, allowing for higher pressure handling and durability in applications. This is often used in industrial settings, such as oil and gas, where robust piping is essential.
Why electrical wiring?
To get the electricity from where it came from to where it is going, Just like water piping, gas piping, sewer piping, etc.
In many areas gas piping must be bonded to what?
Gas piping must be bond to the appliance it serves.
What is the purpose of the drip leg in the gas piping located just before a gas appliance?
The purpose of a drip leg in the gas piping is used as a device to capture dirt and debris from entering the furnace.
Can you use galvanized connections on gas iron pipe?
Most codes do not allow Galvanized piping/fittings on gas piping. I have used galvanized pipe/fittings on exterior gas piping before in the state of Michigan but other states do not allows this. Check with your local code authorities.
Why does natural gas leave a residue in piping?
Natural gas can leave a residue in piping due to impurities in the gas such as sulfur compounds or moisture that can react with the metal of the piping or form deposits over time. These residues can accumulate and clog the piping, leading to reduced flow efficiency and potentially causing operational issues. Regular maintenance and cleaning of the piping can help prevent the buildup of residues.
Why do we need gas meter in new piping installation?
i dunna??
Can type L copper poison you when used for medical gas?
No it will not poison you. Copper piping is used extensively in Medical Gas applications. "TYPE L" signifies the wall thickness of the piping.
What type of piping are you required to use with Methane gas?
As far as I know, for underground piping use plastic, for above ground steel or copper. That is the practice in the UK, but I don't know about the US. I would be surprised if it is different. We did have underground steel pipes but these are now being replaced with plastic and all new is plastic (underground)
Can gas piping be bonded to the electrical grounding system?
Gas piping should not be bonded to the electrical grounding system. It should have a separate bonding connection that complies with local building codes. Bonding gas piping to the electrical grounding system can create safety hazards and is not recommended.
