a laithe works by a rotating jaw with ur work in the chuck and u can use many laithe tools to cut difrent things off of your work sick bled dont mention
It has a head stock(fixed and is connected to motor) and a tail stock(movable).The tool is moved towards the workpiece (which is driven by motor).Used for making cylindrical sections,tapering,drilling..
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
Chuck, Collet, Faceplate, between centers
A milling machine basically look like a drill press, but with the ability to move the work piece sideways. A lathe clamp and spin the work piece horizontally and use a stationary tool bit to cut and shape the work piece.
In auto lathe machine, All the processes is automatic from the beginning to the end . Machine take working pieces from the workpiece box where all the pieces loaded initially,then all the processes done on the workpieces as per the command is given initially . final product comes out finally. But in semi lathe machine , all the work is same as automatic lathe but feed is not automatic it done by manually by technician .
The safe working procedure for operating a lathe machine includes wearing appropriate personal protective equipment (PPE) such as safety goggles and gloves. Ensure the work area is clean and free of obstructions before starting. Always check that the machine is properly set up, tools are securely fastened, and the workpiece is held firmly. During operation, keep hands away from moving parts, never leave the machine running unattended, and immediately stop the machine if any unusual noises or movements occur.
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
Chuck, Collet, Faceplate, between centers
A milling machine basically look like a drill press, but with the ability to move the work piece sideways. A lathe clamp and spin the work piece horizontally and use a stationary tool bit to cut and shape the work piece.
it is basically used for machining..
The ones that i use at college and work are a milling machine, a lathe, a drill, and a saw but i think the main ones (In mechanical engineering) are the Milling Machine and the Lathe.
Lathe for making the cross piece is rounded. The tool is a piece of stationary spins. Milling machines for making flat pieces. The tool rotates the piece is stationary. +++ "Planing" in machine-tool terms describes the action of a Planing-machine, which moves the workpiece held on a horizontal table against a cutting-tool held on a frame adjustable for height (cutting depth) and cross-feed. Not often used now, having largely been supplanted by the milling-machine, and for very large work the plano-mill. ' The planning-tool itself resembles a chisel ground to particular angles.
There are various ways for a lathe to hold its workpiece.The workpiece could be held between centers from the spindle and tail stockIt could be gripped in a chuckA faceplate could be used and the workpiece is screwed, bolted or clamped to it.
One advantage of a lathe machine is that it can perform very detailed and intricate designs. One disadvantage of a lathe machine is that these machines are more expensive than other types of machines used to produce this type of work.
A wood lathe is designed for shaping wood, while a metal lathe is used for shaping metal. The key differences lie in the materials they are meant to work with and the cutting tools used. To effectively utilize both wood and metal on a lathe machine, it is important to adjust the speed, cutting tools, and techniques based on the material being worked on. Additionally, using appropriate safety measures and understanding the properties of each material is crucial for successful lathe work.
In auto lathe machine, All the processes is automatic from the beginning to the end . Machine take working pieces from the workpiece box where all the pieces loaded initially,then all the processes done on the workpieces as per the command is given initially . final product comes out finally. But in semi lathe machine , all the work is same as automatic lathe but feed is not automatic it done by manually by technician .
A cnc lathe can manufacture nearly anything cylindrical. Some even have attachments to do other types of work in the machine as well, for a virtually endless array of parts. Whatever you can imagine really, as long as it will fit in the machine.
The work piece is tight hold in the chuck. the chuck part of the lathe machine .it is made of mild steel .clamping to hold the device to normal cutting and simple .clamp the workpiece rigidly. no vobration of the work piece as well as cutting tool . prevent breakage of the cutting tool. physical accidents can be avoided