0
What else can I help you with?
ASME U stamp?
An ASME "U" stamp designates a vessel as a "pressure vessel" as defined and regulated by ASME codes
What power is required for a radiographic exposure at 76 kV 500 mA?
To calculate the power required for a radiographic exposure at 76 kV and 500 mA, you can use the formula: Power (P) = Voltage (V) × Current (I). Here, P = 76 kV × 500 mA = 76,000 volts × 0.5 amps = 38,000 watts, or 38 kW. Therefore, the power required for the radiographic exposure is 38 kW.
What is asme section one requirements for u t of economizer tube bends?
asme VIII
What is ASME code for shaft design?
The ASME (American Society of Mechanical Engineers) code for shaft design primarily falls under the ASME B31 series for piping and the ASME Y14.5 for dimensioning and tolerancing. While there isn't a specific ASME code exclusively for shaft design, relevant guidelines can be found in ASME B107 for tools and ASME B30 for cranes and lifting devices. Additionally, the principles of stress analysis, fatigue, and material selection are essential in the design process, often using methodologies outlined in the ASME Boiler and Pressure Vessel Code (BPVC). These codes ensure safety, reliability, and performance in mechanical design and applications.
What is asme standard number for manhole?
The ASME (American Society of Mechanical Engineers) standard that pertains to manholes is ASME B31.3, which covers the design and fabrication of piping systems, including manholes. For specific manhole designs and requirements, ASME also references standards like ASME B16.5 for flanges and ASME B16.47 for large diameter flanges. It's essential to consult the relevant sections of these standards for detailed specifications related to manholes in piping systems.
How do you calculate radiographic sensitivity?
Radiographic sensitivity can be calculated as the ratio of the number of true positive results to the sum of true positive and false negative results, multiplied by 100 to get a percentage. This formula helps to evaluate how well a radiographic test can detect true positive cases out of all actual positive cases.
How do you calculate minimum source to object distance per asme section V?
To calculate the minimum source to object distance per ASME Section V, you need to refer to the specific requirements of the examination method being used (e.g., Ultrasonic Testing, Radiographic Testing, etc.) Each method has its own criteria for the minimum source to object distance which must be followed to ensure accurate testing and reliable results. Refer to the appropriate standard or procedure outlined in ASME Section V for the specific details applicable to your examination method.
How do you calculate Specificity and sensitivity?
How to calculate specificity?, please specify ^^
What is Radio graphic test ratio in ASME B31.3?
In ASME B31.3, the radiographic test ratio refers to the minimum ratio of the total length of welds subjected to radiographic examination compared to the overall length of welds in a piping system. Typically, at least 10% of the welds must be examined radiographically, though this can vary based on the criticality of the piping system and project specifications. This ratio helps ensure the integrity and quality of welds in pressure piping systems. Additional requirements may apply depending on service conditions and specific project needs.
What is the difference between an asme b16.5 type flange and an asme b16.2 type flange?
What is difference between ASME B16 & ASME B16.5 Flange
When was ASME created?
ASME was created in 1880.
ASME U stamp?
An ASME "U" stamp designates a vessel as a "pressure vessel" as defined and regulated by ASME codes
What is meant by asme?
ASME (American Society Mechanical Engineering)
When was ASME Medal created?
ASME Medal was created in 1920.
What is the population of Ostabat-Asme?
Ostabat-Asme's population is 203.
What has the author ASME International written?
ASME International. has written: 'Internal combustion engine: newsletter of the Internal Combustion Engine Division of ASME'
All ASME codes and standards?
i want all ASME codes and standards.
