answersLogoWhite

0

One would weld a flange tight by firstly establishing which type of joint they were welding. One of the most common is welding a neck flange. For this you would need to ensure that both pieces of material to be welded are melted on the first bead of the weld. You would continue around the pipe until you reach the beginning. Once back at the start you need to ensure that the final bead is higher than the joint being welded. The weld should be approximately 1/16th of and in to 1/8th of and inch from the pipe to the flange.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is WNRF flange?

Weld Neck Raised Face flange


What is a WNRF?

Weld Neck Raised Face flange


What is a sw cl125 150 ff sw flange?

SW = socket weld flanges flange F.F = flat


What is the full form of WNRF flange?

W : Weld N : Neck R : Raised F : Face, It is a type of flange used for butt weld end connection...Refer ASME B 16.5


Who is the best flange manufacturer in India?

Inco Special Alloys is regarded as one of the leading Flange Manufacturers in India. We have various ranges of Flanges in different shapes, sizes, and specifications to fulfil the demands of our clients. We also are Slip-On flange manufacturer, Weld Neck flange manufacturer, Long Weld Neck flange manufacturer, Threaded flange manufacturer, Blind flange manufacturer, socket flange manufacturer etc which are available in various sizes, shapes, and grades. Hence, Inco Special Alloys is one of the best Flange Manufacturer in India. Our Flanges are well-known and respected around the world for their dependability and quality. Therefore, Inco Special Alloys is the top Flange Manufacturer in India. We have a trained staff that guarantees the quality of Flange and other items throughout the production and distribution processes, which makes Inco Special Alloys the top Flange Manufacturer.


What is definition of the under run in filet weld?

A fillet weld in any single continuous weldmay underrun the nominal fillet weld size specified by2 mm [1/16 in] without correction, provided that theundersize portion of the weld does not exceed 10% of thelength of the weld. On the web-to-flange welds on girders,underrun shall be prohibited at the ends for a lengthequal to twice the width of the flange.


What is a RFTBE weld neck flange I have never seen RFTBE related to flange description before?

Raised Face Through Bolt End.


What are alternatives to IPS plumbing connections?

FIPS or Flange or solder Or Braze Or Weld / Or MJ


What is a butt weld flange?

Butt weld is a type of joint for welding.At this type,the connection area is put in front of each other.Another method of connection is "Socket weld"in which two parts are male and female,one goes into the other then welding operation is done.


Who is the top flange manufacturer and supplier in india?

Inco Special Alloys is regarded as one of the leading Flange Manufacturers in India. We have various ranges of Flanges in different shapes, sizes, and specifications to fulfil the demands of our clients. We also are Slip-On flange manufacturer, Weld Neck flange manufacturer, Long Weld Neck flange manufacturer, Threaded flange manufacturer, Blind flange manufacturer, socket flange manufacturer etc which are available in various sizes, shapes, and grades. Hence, Inco Special Alloys is one of the best Flange Manufacturer in India. Our Flanges are well-known and respected around the world for their dependability and quality. Therefore, Inco Special Alloys is the top Flange Manufacturer in India. We have a trained staff that guarantees the quality of Flange and other items throughout the production and distribution processes, which makes Inco Special Alloys the top Flange Manufacturer. For more information visit - Website - inco special alloys - flange manufacturer in india


What is the take off a 1 socket weld flange?

I would say how ever much gap you have from the face of the flange, to the end of the pipe inside the flange. Put a tape measure in it. It should be like 1/4 inch.


Can you weld a slip on flange to a 90 degree elbow?

Sure why not its the same as welding it to a straight piece of pipe