answersLogoWhite

0

Do not know the term, Weldolet, but if your question is where or how do you decide where you are going to cut a pipe to add a branch line, then it is a matter of where it is possibe and the easiest to do. It is not always as close to where you would like it, but where it makes the most sense to do it. Depends on the type of pipe involved also. Copper or PVC you can cut any place you want. Steel, you can replace a coupling with a T and a union if it is in the middle of a run. With steel either black or galvanized you will have to add a union or go back to the end of the run and take everything apart.

Weld-o-lets are sized for the diameter of the pipe you are tying into and the diameter of the pipe you are adding. Example: 2" x 3" or 6" x 10". If you need the branch pipe to have a theaded connection you would select a Thread-o-let instead. Sizing is the same. Some o-let's can be used for a range of piping sizes. Example: a 3/4" thread-o-let may have 8-12 marked on it meaning you can weld it on to either 8", 10" or 12" pipe.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What the difference between weldolet and thredolet?

A weldolet is a fitting you weld on a (run) pipe, and then butt weld a branch pipe to it. A tredolet is a fitting you weld on a (run) pipe, and then screw a threaded branch pipe to it. Some people call this a threadolet A sockolet is a fitting you weld on a (run) pipe, and then socket weld a branch pipe to it. A nipolet is the same as a weldolet or thredolet but has an elongated branch connection. You have to specify if it's a welded or threaded nipolet.


What is weldolet in pipe fittings?

Weldolet is used for Butt weld branch connection where standard tee is not available due to size restrictions and the piping is of critical / high pressure service.


What is a Weldolets?

A Weldolet is a butt-weld branch connection. It is designed to provide integral reinforcement and minimize stress. They are made to match or exceed the schedule of the pipe.


What is the difference between a weldolet and a sockolet?

Weldolet and Sockolet are basically self reinforced fittings. Weldolet is used for Butt weld branch connection where standard tee is not available due to size restrictions and the piping is of critical / high pressure service. Sockolet is used for socket welding branch connection, which require reinforcing pad.


When the weldolet using?

A weldolet is used in piping systems to create a branch connection from a larger pipe. It is typically employed when a strong and durable joint is required, especially in high-pressure applications. The weldolet allows for a smooth flow of fluid and minimizes stress concentration at the junction, making it ideal for applications in industries such as oil and gas, chemical processing, and water treatment. Its design also facilitates easy welding to the main pipe, ensuring structural integrity.


What is the difference brwteen a weldolet and a pipet?

Weldolet is a trademarked name by Bonney Forge for internally reinforced forged branch outlet fittings. Pipet is a trademarked name by WFI for internally reinforced forged branch outlet fittings. Both comply with MSS SP-97 Internally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends. Referenced in ASME B31.3-2020 304.3.1 a) (1). They are the same


Is a weldolet a butt weld fitting?

Yes, a weldolet is a type of butt weld fitting used in piping systems. It is designed to provide a branch connection to a main pipe, allowing for a seamless flow of fluids. Weldolets are typically welded to the main pipe using a butt weld, ensuring a strong and secure joint. They are commonly used in various industries for their ability to minimize stress concentrations and maintain the integrity of the piping system.


Difference between weldolet and sockolet in piping?

Weldolet has a Bevelled end to butt weld the pipe whereas in sockolet the pipe/tube goes inside it and there it is fillet welded.


Is the weldolet to be fit up with root gap to the run pipe?

yes


Should the weldolet fit-up be stub-in or stub-on?

The fit-up of a weldolet should generally be stub-on, as this configuration provides a more secure and stable connection by allowing the weldolet to be directly welded onto the pipe. This approach minimizes stress concentration and enhances the integrity of the joint. Stub-in fit-ups can be used in specific applications, but they may complicate the welding process and potentially introduce weak points. Ultimately, the choice may depend on factors such as pipe size, application, and design specifications.


How much do you weld on a weldolet?

When welding a weldolet, the amount of weld required typically depends on the specifications of the project and the applicable codes. Generally, a continuous weld is made around the circumference of the weldolet where it connects to the pipe, ensuring a strong joint. The weld size and type should comply with relevant standards, such as ASME or AWS guidelines. It's important to follow proper welding techniques to achieve a secure and leak-free connection.


Can I weld a 10 x 2 sch. XXS weldolet on a 6 pipe?

Yes, you can weld a 10 x 2 schedule XXS weldolet onto a 6-inch pipe, provided that the pipe material and thickness are compatible with the weldolet specifications. Ensure that proper welding techniques and procedures are followed to maintain the integrity of the joint. Additionally, it's important to check the design and pressure requirements to ensure that the weld meets the necessary codes and standards.