0
What else can I help you with?
Will changing the battery from 6v to 12 v affect gas gauge reading?
If it is in your car then no, why do you have a 6v battery in your car in the first place it should be a 12v.
What is the Peak to Peak of a 6v Square wave?
The peak-to-peak (P-P) value of a 6V square wave is the difference between its maximum and minimum voltage levels. For a square wave that oscillates between +3V and -3V, the peak-to-peak voltage would be 6V (3V - (-3V) = 6V). If the square wave oscillates between 0V and 6V, the peak-to-peak voltage would also be 6V (6V - 0V = 6V). Therefore, regardless of the specific levels, a 6V square wave has a peak-to-peak voltage of 6V.
What is the total voltage if a 12v battery 6v battery and 2.5v battery are connected in parallel?
There is no answer to this question. It could be anywhere between 2.5V and 12V. If you connected them in series the answer would be 20.5V, in parallel the higher voltage battery will discharge into the lower rated cells, the resultant voltage is dependent upon the internal resistance of each of the batteries. In practice you wouldn't do this, so it's either a mistake or trick question. www.powerinspired.co.uk
Which circuit would have the brightest light?
If you connect bulbs in parallel across a given voltage supply (eg household mains supply) then they will all draw their rated current and will glow at their rated brightness. If you connect the same bulbs in series then they will glow very much less brightly. This is because the resistance of a bulb's element is also related to the power dissipated in the element. A bulb's element is rated for operation at a particular voltage. You can certainly connect two 6v motorcycle bulbs in series, and connect them to a car battery at 12v, and the two bulbs will be just as bright as they were when individually operated from the motorcycle 6v batttery. However if you connect two 6v bulbs in parallel and then wire them to a 12v car battery they will only glow brighter for a fraction of a second and then ... pop. You will have overheated the elements beyond their designed power handling capability.
Can you substitute 9v dc for 6v dc?
Substituting a 9V DC power supply for a 6V DC supply is generally not advisable, as it can lead to overvoltage conditions that may damage the device designed for 6V operation. Components may overheat or fail, and the device may not function correctly. Always check the specifications of the device to ensure compatibility with the power supply voltage. If a 9V supply is required, consider using a voltage regulator or a suitable step-down converter to safely reduce the voltage to 6V.
What will happen when a 15v current flows through a 6V bulb?
It will glow VERY BRIGHTLY for a few seconds - and then burn out.
Can you jump start a 6V battery of a 12V battery?
No, you should not jump-start a 6V battery with a 12V battery, as the higher voltage can damage the 6V battery and any connected electrical components. Instead, use a compatible 6V battery or a dedicated jump starter designed for that voltage. If necessary, you can use a 12V battery with a proper voltage regulator or a step-down converter to safely charge the 6V battery. Always follow safety precautions when working with batteries.
Can I use a battery charger that is rated at 6V DC 1000 mA to replace one that was 6V DC 100mA or will this damage the battery?
No you should not do that. It will damage the battery and the battery will explode.
Will two 6v batteries make your sons ride on work faster than one 6v battery?
If the machine is designed to run on 6v and you use two 6v batteries instead of one, then . . . -- If you connect the two batteries in parallel, then they will last twice as long between recharges as one battery does. -- If you connect the batteries in series, then they will definitely overheat the motor, and possibly destroy it.
Is the 55b24l s battery a 12V or 6V?
The battery is a 12V car battery.
What resistor is needed for a 6v dc motor with a 4.5v battery?
A 6v motor might not run at all on a 4.5v battery. Whether or not it does, it's likely to discharge the battery rather rapidly. A series resistor will help the battery last longer, but will make it even less likely that the motor will run at all. You're better off taking some time to find either a 4.5v motor or a 6v battery.
Can you use a 12v 7ah battery in place of a 6v 7ah battery?
No, you cannot use a 12V 7Ah battery in place of a 6V 7Ah battery without modifications. The voltage difference would likely damage devices designed for 6V, as they are not built to handle the higher voltage. If the device requires a 6V supply, it is crucial to use a battery that matches the specified voltage to ensure safe and proper operation.
What is the largest battery?
The largest battery in size is a 6V or 6 Volt.
Is the 2cr5 6v lithium camera battery rechargeable?
No, it is a disposable battery.
Will changing the battery from 6v to 12 v affect gas gauge reading?
If it is in your car then no, why do you have a 6v battery in your car in the first place it should be a 12v.
Can you power led lights off a 6v battery?
Yes, most leds will run on a 6v battery. Just look at the required voltage and make sure you don't exceed the maximum voltage. If the voltage is to high, find the correct resistor.
How you charge 5v battery with 6v generator?
You don't.
