It depends on the lock and where the mechanism is. Need the year, make, and model in order to provide a better answer.
Locks that have a plunger type mechanism can have a modification made so the foot would activate the lock.
This is not possible, but you can make it appear that way, for example, get a video component, set the visible to false, get a button, make the video play an animation of a clicked button, and once another button is clicked the orignal button dissapears and the video player appears and plays a short animation of a clicked button.
The normal code for an input button is this:To make it inactive, add this:
You can make a clear text button just by dragging the textbox from toolbox window and drop on form design window,then you can modify the text button by either enlarging it or decreasing the size
titanium
You use the input tag and the button type. Value will specify what appears on the face of the button. All input tags should appear inside form tags. The following will create a simple button, that when clicked will pop up a message, using a bit of javascript. Copy and paste it or type it exactly as it is into your code and it will work. <FORM> <INPUT Type=Button value="Click Here" onClick="alert('Hello');"> </FORM>
Take te child lock off of the door
To lock a door from the inside for security and privacy, you can use a deadbolt or a privacy lock. Simply turn the lock mechanism or push the button to secure the door. Make sure the door is fully closed and locked before leaving the room.
Hint: Have you checked the child-proof door lock button located in the door's door jamb to make certain it is in the unlocked position?
One should pry the lock switch from the door panel and unplug the wiring. Then plug the new lock switch to the wiring and push the button to make sure it works. Put the new lock into door panel
It is probably a bad power lock actuator. it is inside the door, before removing it make sure that when the button is pressed there is power to the wire connector, if not check for cracked or broken wires leading into the door.
On the inside upper frame of the rear passanger door when open there are 5 bronze pegs that make contact with the door when closed, if these become dirty the electrical contact will not lock the rear door. Take fine grade sandpaper or steelwhool and shine them up, close the door and try it again.
To set up a lock on Samsonite luggage, locate the small reset button on the lock. Press and hold the button while setting your desired combination. Release the button to save the new combination. Make sure to test the lock before using it to ensure it is set up correctly.
Spell? To open/lock a door in minecraft, it requires you to make a system of redstones that is connected to the door and a button, lever, or a pressure plate or if you want to lock it you make a sign that says [PRIVATE] when you click okay it will lock the door or doors if there are two doors next to another. Same with chests. If you are worried about people who grief on mutiplayer mode, then you can do the same as a door. You can lock it by placing a chest or chests ( two together ) by putting a sign above the chest saying [PRIVATE] hope this helped.[:
Your alarm system is in valet mode. To fix this problem: Unlock the car, and open the door. With the door open, and the car unlocked, press: LOCK/UNLOCK button ONCE, press the AUX button ONCE, and then press the LOCK/UNLOCK button ONCE more. When you press this key combination, the vehicle security system should begin functioning correctly again.
The window lock is faulty. It happened on my Jeep and i replaced the driver's dorr control module and it worked just fine...until that one broke too.
To replace a sliding glass door lock, you will need to remove the old lock by unscrewing it from the door. Then, you can install the new lock by following the manufacturer's instructions and securing it in place with screws. Make sure the new lock is compatible with your door before installing it.
The door lock actuator is going bad.