answersLogoWhite

0

The question is ambiguous. You can pack it carefully for transport if that is what you're wanting to know.

Lightning arresters fail at times. I don't know that there is anything you can do to prevent this. I believe the normal procedure is to check the drainage current flow on a regular basis, and if this is increasing to unacceptable levels, replace the arrestor. It may be possible to refurbish an arrestor, but I have never seen this done.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

Which inventor wanted to develop affordable lighting for homes?

Thomas Edison was the inventor who wanted to develop affordable lighting for homes.


What is different between Lighting and lighting design?

Lighting is referring to the object.Lighting Design refers to the arrangement of the Lighting objects.Lighting objects are numerous and diverse.sconce/wall fixtureceiling fixturechandelierpost lanterngas lanternpendant/hanging fixturetrackrecessed canspotfloor lamptable lampetc., etc.,Lighting Design does go far beyond the arrangement, there are many other factors to consider when working with a lighting design, such as the heat a certain type or number of lights will emit as well as the color tone and how the placement of each light will affect the color palette of the room and the balance of the floor plan.


Is lighting a functional requirement of a roof?

No, it is not


What 3 types of light do designers work with?

Designers typically work with three types of light: ambient, task, and accent lighting. Ambient lighting provides overall illumination to a space, creating a comfortable level of brightness. Task lighting focuses on specific areas to facilitate activities such as reading or cooking, while accent lighting highlights particular features or objects, adding visual interest and depth to a design. These types of lighting work together to enhance both functionality and aesthetics in a space.


A 32A breaker was controlling a lighting circuit but is now on a 6A breaker which is now buzzing what should you do?

Answer for countries in Europe and other world areas running a 50 Hz supply service.Depending on the load of your lighting circuit. I would measure the current with an inductive amp meter. once you know the current required for your lighting circuit, you then install a circuit breaker which is 15% higher than your load. eg, load is 10A. 10A load + 15 % = 12A breaker (15 A is ok as the breaker is used to protect the wiring and should be rated in consequence of your wiring by 25% less or its current rating, or less, not the load)The humming of your lighting circuit breaker indicates that your breaker is either faulty, or having a difficult time keeping a closed circuit. Or simply that the manufacturer produced a breaker that hums by nature of its construction.

Related Questions

Who invented the lighting rod which helped protect building from lighting?

Ben Franklin invented the lighting rod and helped start the Philadelphia fire department.


How can a lighting rod protect your buildings?

i moves the lightining into the earth


How do you protect the damaged ozone layer?

We msut protect the ozone layer. For this we should not use CFC products.


What will possibly happen if we don't protect our sensitive parts?

These can become damaged.


Does a soft case protect your camera at all?

A soft case will protect a camera from being damaged if it were to fall. It can also protect sensitive lenses from scratches.


Why use over current relay?

To protect things from getting damaged by overcurrent.


How can you protect your ear from being damaged?

Avoid loud noise, boxing and wrestling.


What does to protect mean?

it means when you cover something like a laptop with bubble rap to stop it form getting damaged that is what protect means.


What are the common issues that may require landscape lighting repair?

Common issues that may require landscape lighting repair include faulty wiring, damaged fixtures, burned-out bulbs, and malfunctioning timers or sensors.


Why do people were ear defenders?

To protect their ears and hearing from getting damaged by loud noises.


Why do you have bone over the heart?

To protect your heart like if someone punches you, your heart will not be damaged


What is the function of lighting conductor?

A lightning conductor, also known as a lightning rod, is designed to protect buildings and structures from being damaged by lightning strikes. It provides a safe path for the electrical current from a lightning strike to be conducted to the ground, preventing damage to the building and reducing the risk of fire or injury.