answersLogoWhite

0

One old trick to solder two wires is to twist them together and twist some solder round them as well, wrap them in foil and apply a lighted match.

User Avatar

Wiki User

10y ago

What else can I help you with?

Continue Learning about Engineering

Tools used for soldering?

The main tools for soldering include a soldering iron, a stand for the soldering iron, and solder. You'd likely use other tools such as brushes, picks, heat sinks, solder wick, desoldering irons, etc.


How do you break in a new soldering iron?

Look at the 'bit', the part that gets hot that you do the soldering with. It should have an inclined flat surface on the end. If it has not, make one by using a file. Heat the soldering iron up. At the same time get the solder out, which should be tin solder with internal flux. When the iron is hot, quickly file the surface of the bit clean and apply the solder, which should immediately 'take' to the surface. That's it.


What is a solder remover?

Solder remover is an object or device for removing solder, usually from printed circuit boards. It can be in the form of a copper mesh called solder wick, a separate vacuum device you use alongside a soldering iron, or a desoldering iron. A desoldering iron gets hot like a soldering iron, but the tip is hollow and there is a squeeze bulb mounted on top. So you heat up the solder on the board and then use the bulb to vacuum up the solder and then deposit in a safe place such as a can or ash tray.


What is a soldering iron stand?

First of all, solder is metal alloy with a low melting point at 200 to 840 degrees Fahrenheit. A soldering iron is a tool used to metal solder to join two metal objects together. Therefore a stand for an soldering iron would just hold it. They usually have metal springs to hold the iron, obviously with a higher metaling temperature. This is a link to a picture of a soldering iron holder: http://www.qwikfast.co.uk/catalogue/images/silvsoldironstand427552.jpg


What is cold flow?

It is a term used when soldering with a soldering iron. It means that the solder is not completely up to temperature to make a proper joint. A good solder joint is very silvery in colour and shines when it is done right.

Related Questions

What is iron tin?

Tinning the Soldering iron is when the hot iron is coated with solder to aid in soldering and heat transfer


What tools are needed to solder circuit boards?

Soldering iron, solder, flux


Tools used for soldering?

The main tools for soldering include a soldering iron, a stand for the soldering iron, and solder. You'd likely use other tools such as brushes, picks, heat sinks, solder wick, desoldering irons, etc.


How do you stolder?

Solder. You'll need a soldering iron, for starters.


What equipments are there in soldering?

There is a lot of equipment in Soldering and I am telling you about which I know. Soldering Iron You can’t do soldering without a soldering iron/gun. But you don’t have to buy an expensive soldering iron/gun. You can find soldering irons in less than $10 that would work for most beginners’ needs. Wire Cutter The wire cutter is a very handy little soldering tool. We mostly use it to cut long component legs, or to strip the end of a wire. Wire Cutters is also known as flush-cutters, diagonal cutters, electronic snippers, clippers, etc. Wet Sponge A wet sponge is very useful for cleaning the tip of the soldering iron. The tip is hot which means it will oxidize very fast and get dirty. A clean tip transfers heat faster and makes your soldering easier. A sponge is so cheap anyway, so you should always keep one together with your other soldering tools. Soldering Stand A soldering iron gets hot after performing soldering, so it’s important to place it in a safe way in between soldering. A soldering iron stand is very useful for this. Since it takes up a lot of space, I don’t bring mine when travelling, but I always have one at my desk in Illinois. Safety Glasses A pair of safety glasses is something I really recommend when you do soldering. The consequences of getting hot soldering splashed into your eye can be terrible. So, please use them. Tweezers Tweezers are great. You can use them to keep components in their place and to avoid burning your fingers when you do soldering. If you ever solder surface mount components, these are very useful for placing small components. Solder wick The solder wick is another tool for removing solder. It’s made up of copper threads that will absorb the solder from the solder joint. For example to remove “solder bridges” between pins on a chip or if there’s a bit of solder left on a bigger solder joint.


Can you solder brass to copper?

Yes, brass can be soldered to copper using a soldering iron and appropriate soldering techniques.


How can I effectively solder a silver chain?

To effectively solder a silver chain, you will need a soldering iron, silver solder, flux, and a steady hand. First, clean the chain and apply flux to the area you want to solder. Next, heat the soldering iron and melt a small amount of solder onto the joint. Finally, carefully heat the joint with the soldering iron until the solder flows and creates a strong bond. Allow the joint to cool before handling the chain.


How can I effectively solder LED strips?

To effectively solder LED strips, first ensure the soldering iron is hot enough. Then, tin the soldering iron tip with solder. Next, heat the solder pad on the LED strip and apply solder to create a strong connection. Be careful not to overheat the LED strip to avoid damage.


Can you solder brass, and if so, what are the necessary steps and tools required for the process?

Yes, you can solder brass. The necessary steps for soldering brass include cleaning the surfaces to be joined, applying flux to the area, heating the brass with a soldering iron or torch, and then applying the solder to create a strong bond. The tools required for soldering brass include a soldering iron or torch, solder, flux, and safety equipment such as goggles and gloves.


Characteristic of soldering iron?

A soldering iron is a tool used to melt solder in order to join metal components together. It typically has a heated metal tip that transfers heat to the solder to create a strong bond. Soldering irons come in different wattages, tip sizes, and types for various soldering applications.


Can you mend exhausts by soldering?

Welding or brazing perhapsReplacement is best Solder has too low a melting point to be good in such a high temperature environment. After running the car for a few miles, you could apply the solder to the muffler and it will melt without a torch or soldering iron.


Why soldering iron melt the lead?

Soldering irons are designed to heat up the lead in solder to its melting point, allowing it to flow and create electrical connections. The high temperature of the soldering iron transfers heat to the lead in the solder, causing it to melt and bond with the materials being soldered.