answersLogoWhite

0

My suggestion is to attend a training course designed for your particular requirements, which relates to the instrument in question. What is your definition of 'surveying'? Is it collecting a few points on a site, or laying down a large traverse with multiple setups and observation sets?

Although operating manuals are available on line, there is no substitute for one to one teaching with hands on experience. Should you require such a course just Google Phoenix Surveying Equipment uk.

Good luck.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Engineering

What is error code e-03 on topcon 303 total station?

Error message displayed when an internal problem presits. You have to turn off and then back ON total station just before starting to operate...If the problem was not fixed this way you have to send your instrument for repair.


When was total station survey equipment invented?

Ferhan ahamed


What is the function of total station?

Sorry i am still an amateur. The function of a total station in a construction site have various use. Some of the most common are COGO, mapping & stake-out. But the first and foremost of total station is to measure angle & distance, which can then be calculated coordinates (XYZ or NEZ)


How is a telecommunication tower's verticality measured?

Hire Some Surveying Company and do it with Total Station which will give you the accuracy of 1 mm/ 0°00'10"


What is mean by burden of the current transformers?

The burden on a CT is the sum total impedance connected to the secondary - including the CT secondary winding coil resistance, lead resistance, and any loads attached (relays, meters, etc.).If this is for power calculations and CT saturation in three phase systems, remember you must multiply the lead resistance by two to get the total path resistance.Another AnswerWe use the word, 'burden', to describe the load supplied by the instrument transformer's secondary. This is normally a measuring instrument or protection relay. We use the word 'burden' to distinguish it from the 'load' supplied by the circuit to which the primary winding is connected.

Related Questions

What is error code e-03 on topcon 303 total station?

Error message displayed when an internal problem presits. You have to turn off and then back ON total station just before starting to operate...If the problem was not fixed this way you have to send your instrument for repair.


What is the difference between thedolite and total station?

A theodolite is a surveying instrument used to measure horizontal and vertical angles. It requires a separate instrument to measure distances. A total station is a surveying instrument that combines the functions of a theodolite and distance measuring device, allowing for simultaneous measurement of angles and distances.


Which is precise instrument to take levels either auto-level or total-station?

Uh, a synthesizer


What are working principle of a robotic total station?

A robotic total station is a surveying instrument that combines a total station with automated features for remote operation. It uses a motorized mechanism to automatically track a prism target, allowing the surveyor to control the instrument from a distance using a remote controller. This enables one-person operation and reduces the need for an assistant in the field.


What is least count of total station?

The least count of a total station typically refers to the smallest measurement increment that can be displayed and recorded by the instrument. This value is determined by the precision of the internal components and the software of the total station, which can vary between models and manufacturers. Common least count values for total stations range from 1 second to 5 seconds.


What is the diffrence between thedolite and total station?

A theodolite is a surveying instrument used for measuring horizontal and vertical angles, typically with a rotating telescope. A total station combines the functionality of a theodolite with an electronic distance measurement (EDM) device to measure angles and distances simultaneously. Total stations are more advanced and versatile than theodolites.


What is the meaning of total station?

What is the meaning of total Station?


What is the different between total station and EDM?

A total station is a surveying instrument that integrates electronic distance measurement (EDM) technology along with angular measurements to determine points on the ground. EDM specifically refers to the technology that measures distances using electromagnetic waves or infrared light. In essence, EDM is a component within a total station that helps determine distances accurately.


What is work of total station in field?

A total station is a surveying instrument used to measure and record coordinates of points in the field. It combines a theodolite for measuring angles with a distance measuring device to calculate positions accurately. The data collected by a total station can be used to create detailed maps, perform land surveys, and monitor construction projects.


How far is Manchester airport station from Manchester airport?

There is a bus station attached to the Airport where National Express operate regular services from.


How do you operate a leica 1200 series total station?

The operation depends upon the complication & functions of various instruments ..i have been using leica whic iz best & very easy ..only try to use at first thn u can tak up easily ..?? All these depends on your basic knowledge on TOTAL STATION


How do you survey with total station?

To survey with a total station, set up the instrument properly on a stable tripod, then level it using the built-in bubble level. Select the surveying mode, aim the telescope at the target, and record the horizontal and vertical angles along with the distance measurement. Repeat this process for multiple points to create an accurate survey of the area.