0
Abs to PVC glue sold at Home Depot
Color it aqua blue/green
plumbers key term. GUMBY GLUE
Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
What else can I help you with?
How to connect a PVC pipe to copper pipe?
C x M adapter C x F adapter PVC x F adapter PVC x M adapter or Thread if your really using "pipe" in lieu of "tubing"
How do you connect Copper pipe to PVC?
You can often find a modern connector such as Sharkbite or Qwest fitting to do this.
Sch 80 PVC pipe versus sch 40 PVC pipe?
Yes
How do you connect cast iron pipe to PVC?
You don't, you remove the plastic junk and replace the toxic plasatic with cast iron
How to locate PVC pipe underground?
With a PVC locator
What does the PVC pipe under a bathroom sink connect to inside the wall?
It will connect to the PVC pipe into the wall which ultimately will connect into the main sewer line outside.
How can I repair a PVC pipe?
To repair a PVC pipe, you can use a PVC pipe cutter to remove the damaged section, clean the area, apply PVC primer and cement, then connect a new piece of PVC pipe using a PVC coupling or repair fitting.
How can I connect a PVC pipe to a hose bib?
To connect a PVC pipe to a hose bib, you can use a PVC male adapter and a threaded hose bib. Simply screw the male adapter onto the hose bib and then glue the PVC pipe into the other end of the adapter using PVC cement. This will create a secure connection between the PVC pipe and the hose bib.
How can I connect a gutter to a PVC pipe using a gutter to PVC adapter?
To connect a gutter to a PVC pipe using a gutter to PVC adapter, first ensure the gutter and PVC pipe are clean and dry. Insert one end of the adapter into the gutter and the other end into the PVC pipe. Secure the connection with screws or adhesive as needed. Test the connection by running water through the gutter to ensure it flows smoothly into the PVC pipe.
How to connect 1/4 irrigation tubing to PVC pipe?
To connect 1/4 inch irrigation tubing to PVC pipe, you can use a barbed fitting. Simply insert the barbed end of the fitting into the tubing and then connect the other end to the PVC pipe using a PVC cement or a threaded adapter. This will create a secure connection for your irrigation system.
What is the best way to connect PVC pipe to a barb fitting?
The best way to connect PVC pipe to a barb fitting is by using a hose clamp. This will securely hold the pipe onto the fitting and prevent any leaks.
What is the best way to connect two sections of PVC pipe with a 2 inch PVC coupling?
The best way to connect two sections of PVC pipe with a 2 inch PVC coupling is to first clean and dry the pipe ends, apply PVC primer and cement to the ends and inside the coupling, then quickly push the pipe ends into the coupling and hold them in place for a few seconds to allow the cement to bond.
What is the best way to connect a PVC pipe to a poly pipe using a PVC to poly adapter?
To connect a PVC pipe to a poly pipe using a PVC to poly adapter, the best way is to follow these steps: Cut the PVC pipe and poly pipe to the desired lengths. Clean and prepare the ends of both pipes. Apply primer and cement to the PVC pipe and the adapter. Insert the PVC pipe into one end of the adapter and hold in place for a few seconds. Repeat the process for the poly pipe on the other end of the adapter. Allow the cement to dry and set before using the connected pipes. This method ensures a secure and leak-proof connection between the PVC and poly pipes.
How can I connect PVC to galvanized pipe?
To connect PVC to galvanized pipe, you can use a PVC to threaded adapter. This adapter has a female threaded end that can be screwed onto the male threaded end of the galvanized pipe. Make sure to use Teflon tape on the threads to create a tight seal and prevent leaks.
What is the best way to connect a PEX pipe to a PVC pipe using a PEX to PVC adapter?
The best way to connect a PEX pipe to a PVC pipe using a PEX to PVC adapter is to follow the manufacturer's instructions carefully. Typically, this involves cutting the PEX and PVC pipes to the correct length, deburring the edges, and then using the appropriate tools to secure the adapter in place. It is important to ensure a tight and secure connection to prevent leaks.
What is the best way to connect a downspout to a PVC pipe using an adapter?
The best way to connect a downspout to a PVC pipe using an adapter is to first measure the diameter of both the downspout and the PVC pipe. Then, choose a suitable adapter that fits both sizes. Next, cut the downspout and PVC pipe to the desired length and attach the adapter securely using PVC cement. Finally, ensure that the connection is watertight to prevent leaks.
How can I connect PVC pipe effectively and securely?
To connect PVC pipe effectively and securely, you can use PVC primer and cement. First, clean and dry the pipe ends. Apply primer to both the pipe and fitting, then apply cement to the pipe end and fitting socket. Quickly push the pipe into the fitting and hold for a few seconds. Allow the joint to set for the recommended time before using.
