Resistance is resistance , no matter if it is contact resistance or any other resistance. And formula is R = V / I.
A: I snot a resistor but rather an unwanted resistance on a contact
The resistance force multiplied by the resistance distance.
what is the diference betwean calculated and maesured value
If the wire length is 100m and the Diameter is 1mm calculate the Resistance of wire?
Wheatstone bridge is used to calculate the resistance of unknown resistor in the circuit.
Contact.
water resistance is contact force.
Air resistance is a contact force because you are in contact with the air in order to apply that force.
it is contact force
water resistance is contact force.
To calculate the resistance for a slip ring motor, there is an equation that must be solved. This is Torque = S/R. S is the slip of the motor and R is the resistance of the motor.
Contact resistance increases with increasing roughness of adjoining surfaces. Rough surfaces have less contact area, resulting in higher resistance due to small contact points and trapped air pockets. Smoother surfaces provide better contact and lower resistance.
For information on the games "Resistance - The Fall of Man" or "Resistance 2", contact pr@renaandterry.com
A: I snot a resistor but rather an unwanted resistance on a contact
The resistance force multiplied by the resistance distance.
Contact.
No, wind resistance is an example of a non-contact force, as it acts on an object without physical contact. Contact forces, on the other hand, require direct contact between objects for the force to be applied.