I don't know but I know a site that can help, the forum at Plbg.com
A trim kit is just the outside parts that you see. This will make you faucet look better, but it wont affect the function of your old valve. If your shower valve doesn't work right, replace it.
Though not a plumber, I can say that shower valves are usually made of brass(a very good material). Therefore they are also expensive to replace (50 dollars for the valve, 150 dollars per shower valve if done by a competent plumber). Therefore, when you notice a leak coming from your shower, try to replace the seat washer (usually the hot water side needs to be replaced first). If you still have a leak, it's time to replace the shower valve.
you have trash in your line take the shower head off and remove trash or possibly in water valve at shower
First decide if you want to take a shower valve repair yourself, or contact a plumber. If you decide to repair the shower valve yourself, first you will need to shut off all water to the shower and tub.Next, turn the valves to the on position to relieve any pressure, and remove the set screws. Next, remove the trim ring and save all of the gaskets. Take all of the valve parts to a home improvement store where they will assist in finding you all the replacement parts. Lastly, you'll need to put everything back together in reverse order.
This will involve breaking open the shower wall, taking out the one handle unit and rearranging the pipework in order to replace it with a two handle valve unit. This not a DIY job, call a plumber to do this to save yourself the headache of having to call one later
To change a shower valve, you will need to turn off the water supply, remove the old valve, install the new valve, and then test for leaks. It is important to follow the manufacturer's instructions and use the proper tools for the job.
If you mean shower valve, screws are for shower valve coverplate.
Behind shower valve handle and trim plate
Yes, remove your old shower valve and fit a new Moen anti-scald valve. This will not change when other items are turned on.
The purpose of a shower valve seat is to create a tight seal between the valve and the faucet, preventing leaks and controlling the flow of water. It contributes to the functionality of the shower valve by ensuring that water only flows when the valve is open and stops when it is closed, allowing for precise control of water temperature and pressure.
Cut out the drywall in the wall behind the shower. Replace the valve. Patch the drywall.
To replace a shower valve with a new one, you will need to turn off the water supply, remove the old valve, install the new valve following the manufacturer's instructions, and then test the new valve for leaks before using the shower.
The shower valve may stick out too far due to improper installation or a mismatch between the valve and the wall.
To remove a shower valve, you will need to turn off the water supply to the shower, remove the handle and trim plate, and then use a wrench to unscrew the valve from the piping. Be sure to follow any specific instructions for your particular type of valve.
To shut off the water to the shower in case of a leak or maintenance issue, locate the shut-off valve for the shower. This valve is typically located near the shower or in the basement. Turn the valve clockwise to shut off the water supply to the shower.
A leaking shower valve by installing a new cartridge.
Common causes of a leaking shower include damaged grout or caulk, a faulty shower pan, or a worn-out shower valve. To fix a leaking shower, you can reseal the grout and caulk, repair or replace the shower pan, or replace the shower valve if necessary.