First decide if you want to take a shower valve repair yourself, or contact a plumber. If you decide to repair the shower valve yourself, first you will need to shut off all water to the shower and tub.Next, turn the valves to the on position to relieve any pressure, and remove the set screws. Next, remove the trim ring and save all of the gaskets. Take all of the valve parts to a home improvement store where they will assist in finding you all the replacement parts. Lastly, you'll need to put everything back together in reverse order.
This will involve breaking open the shower wall, taking out the one handle unit and rearranging the pipework in order to replace it with a two handle valve unit. This not a DIY job, call a plumber to do this to save yourself the headache of having to call one later
You dismantle it from the front, find the problem and take the main part to Home Depot to find a repair kit. Then after repair, re-assemble in opposite way.
Though not a plumber, I can say that shower valves are usually made of brass(a very good material). Therefore they are also expensive to replace (50 dollars for the valve, 150 dollars per shower valve if done by a competent plumber). Therefore, when you notice a leak coming from your shower, try to replace the seat washer (usually the hot water side needs to be replaced first). If you still have a leak, it's time to replace the shower valve.
I don't know but I know a site that can help, the forum at Plbg.com
you have trash in your line take the shower head off and remove trash or possibly in water valve at shower
To fix a diverter valve in a shower, you will need to turn off the water supply, remove the handle and trim plate, unscrew the diverter valve, replace it with a new one, and reassemble the parts. Make sure to test the shower to ensure the diverter valve is working properly.
If your shower valve is leaking, you can fix it by replacing the valve cartridge or seals. You may need to turn off the water supply to the shower before attempting any repairs. If you are unsure how to fix it, it is recommended to contact a professional plumber for assistance.
To fix a diverter valve on a shower, you can start by turning off the water supply to the shower. Next, remove the handle and trim plate to access the diverter valve. Check for any debris or buildup that may be causing the issue and clean it out. If the diverter valve is damaged, you may need to replace it with a new one. Reassemble the parts and turn the water supply back on to test the diverter valve.
To fix a leaking shower valve, you can start by turning off the water supply to the shower. Then, disassemble the valve and check for any worn out or damaged parts such as washers or O-rings. Replace these parts as needed and reassemble the valve. Finally, turn the water supply back on and test the valve to ensure the leak is fixed.
Your shower may be whistling due to a build-up of mineral deposits or a faulty valve. To fix it, you can try cleaning the showerhead with vinegar to remove any deposits. If that doesn't work, you may need to replace the shower valve.
To fix a broken shower valve, you can follow these steps: Turn off the water supply to the shower. Remove the handle and trim plate to access the valve. Inspect the valve for any damage or wear. Replace any damaged parts or the entire valve if necessary. Reassemble the valve, handle, and trim plate. Turn the water supply back on and test the shower to ensure it is working properly.
Your shower may be dripping water due to a worn-out or faulty shower valve or faucet. To fix it, you can try tightening the faucet handle or replacing the valve or washer. If the issue persists, it may be best to consult a plumber for further assistance.
Common causes of a leaking shower include damaged grout or caulk, a faulty shower pan, or a worn-out shower valve. To fix a leaking shower, you can reseal the grout and caulk, repair or replace the shower pan, or replace the shower valve if necessary.
To fix a shower diverter valve, you can start by turning off the water supply to the shower. Next, remove the handle and trim plate to access the diverter valve. Check for any debris or mineral buildup that may be causing the issue. Clean or replace the diverter valve if necessary. Reassemble the parts and test the shower to ensure the diverter valve is working properly. If the problem persists, consider seeking professional help.
To fix water coming out of the faucet when the shower is turned on, you may need to replace the diverter valve in your shower. The diverter valve controls the flow of water between the faucet and the showerhead. If it is faulty or worn out, water may leak out of the faucet when the shower is on. You can consult a plumber for assistance with replacing the diverter valve to resolve the issue.
Your shower may be constantly leaking due to a worn-out or faulty shower valve or faucet. To fix it, you can try tightening the connections, replacing the washers or seals, or installing a new shower valve or faucet. If the issue persists, it may be best to consult a professional plumber for further assistance.
To fix a shower diverter valve that is not working properly, you can try cleaning or replacing the diverter valve cartridge. First, turn off the water supply to the shower. Then, remove the handle and trim plate to access the diverter valve. Clean the valve and cartridge with a vinegar solution or replace the cartridge if necessary. Reassemble the parts and test the shower to see if the issue is resolved. If the problem persists, consider seeking help from a professional plumber.