Honestly I don't think you CAN get linseed oil off of anything. I know people who have found dried linseed oil paint in their hair 2 months (and dozens of showers) after leaving a jobsite. Linseed oil does one thing very well- it permiates and infiltrates most any surface it comes into contact- that is why it is such a good preservative for wood, masonry and even metal. Geting it off your skin is tough enough using paint thinners, turpentine, etc, and really you're just diluting it (oh, and it's being partially absorbed into your skin too).
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"
It's used to clean sea creatures after an oil spill, so I think it's safe for your concrete.
you need to have a ''keyway''---that is a groove in the base concrete,can be cut in if concrete has set,if not set,oil a 2x4lightly(lightly) & imbed it into the base concrete flush.
CONCRETE RESIDUE RUNOFF Contact the concrete contractor and have them clean up their mess. Asa professional contractor, that is his responsibility.
Yes, you can. You should clean the dry concrete with water and a brush first, and you should use a bonding agent (available pretty much anywhere you buy concrete) for optimal adhesion. You may also wish to add reinforcement such as rebar.
Boiled linseed oil is used as a preservative for concrete and wood. It is also used as an ingredient in paints, varnishes, and stains.
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"
Yes. Cleaning with it can be done by including one part vinegar. Conditoning the leather can be done by simply using the linseed oil.
Yes, linseed oil is combustible.
Yes, linseed oil is flammable.
why i linseed oil not used on oil stones
No, linseed oil is not a saturated fat; it is a polyunsaturated oil.
An alternative to linseed oil for oil painting is walnut oil.
Yes, boiled linseed oil is flammable.
Yes, linseed oil is flammable when dry.
Double boiled linseed oil contains extra chemical additives that boiled linseed oil does not have. These chemical are added to help with the drying process.
A suitable substitute for linseed oil in oil painting is walnut oil.