Multiply by 1000. .19MVA = 190kVA
Va=volts x amps. The K stands for one thousand. So 1 Kva is one thousand watts. So 415v times 120a= 49,800 what's. You divide that by a thousand and you get 49.8. So it would be 49.8 Kva.
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
To convert VA (volt-amperes) to kVA (kilovolt-amperes), you divide by 1,000. Therefore, 100 VA is equal to 0.1 kVA, since 100 VA ÷ 1,000 = 0.1 kVA.
remove three 0s will do the trick
To convert kilovolts (kV) to kilovolt-amperes (kVA), you need to know the power factor of the system, as kVA accounts for both voltage and current in an AC system. Without a specified power factor, you cannot directly convert kV to kVA. However, if you assume a power factor of 1 (which is ideal), then 80 kV would be equal to 80 kVA in a purely resistive load scenario.
kva*cos(phase angle)
5kw = 6.25 kva becoz kva = kw/ pf if we take pf is o.8
To convert amps to kVA, you use the following formula: Amps = (kVA x 1000 / voltage) / 1.73
You cannot convert them. KVA is a measure of power, while amperes are a measure of current.
a kva is 1000 vaK is kilo, which means 1000 similar to how a kilometer is 1000 metersTransformers are usually rated in KVA, so a 45 KVA Transformer is a 45 000 VA Transformer
To convert 2 kW to kVA in single phase, you need to know the power factor. If we assume a power factor of 0.8 (common for many single-phase loads), the conversion formula is kVA = kW / power factor. Therefore, for 2 kW at a power factor of 0.8, the result would be 2 kVA / 0.8 = 2.5 kVA.
Va=volts x amps. The K stands for one thousand. So 1 Kva is one thousand watts. So 415v times 120a= 49,800 what's. You divide that by a thousand and you get 49.8. So it would be 49.8 Kva.
The same way, as you convert Appels to Carrots ........... There is a formula: KVAr = KVA / KW or cos=KW/KVA > Yes, we are treating KW, KVA, & KVAr as the 3 sides in a 90 deg TRIANGLE ! KW= vertical katede KVAr = horizontal katede KVA = hypotenuse
You must know the current or resistance to convert voltage to power.
To convert VA (volt-amperes) to kVA (kilovolt-amperes), you divide by 1,000. Therefore, 100 VA is equal to 0.1 kVA, since 100 VA ÷ 1,000 = 0.1 kVA.
remove three 0s will do the trick
Amperes when kva is shown. The formula is, Amps = kva x 1000/1.73 x volts.