To convert watts into amperes you divide the circuit voltage into the watts. Amps = Watts/Volts.
<<>>
Converting Watts to Amps
The conversion of Watts to Amps is governed by the equation Amps = Watts/Volts
For example 12 watts/12 volts = 1 amp
Converting Amps to Watts
The conversion of Amps to Watts is governed by the equation Watts = Amps x Volts
For example 1 amp * 110 volts = 110 watts
Converting Watts to Volts
The conversion of Watts to Volts is governed by the equation Volts = Watts/Amps
For example 100 watts/10 amps = 10 volts
Converting Volts to Watts
The conversion of Volts to Watts is governed by the equation Watts = Amps x Volts
For example 1.5 amps * 12 volts = 18 watts
Converting Volts to Amps at fixed wattage
The conversion of Volts to Amps is governed by the equations Amps = Watts/Volts
For example 120 watts/110 volts = 1.09 amps
Converting Amps to Volts at fixed wattage
The conversion of Amps to Volts is governed by the equation Volts = Watts/Amps
For Example, 48 watts / 12 Amps = 4 Volts
Explanation
Amps are how many electrons flow past a certain point per second. Volts is a measure of how much force that each electron is under. Think of water in a hose. A gallon a minute (think amps) just dribbles out if it is under low pressure (think low voltage). But if you restrict the end of the hose, letting the pressure build up, the water can have more power (like watts), even though it is still only one gallon a minute. In fact the power can grow enormous as the pressure builds, to the point that a water knife can cut a sheet of glass. In the same manner as the voltage is increased a small amount of current can turn into a lot of watts.
It is expressed in Volt-Amperes not Watts.
You can't really convert that. If you multiply volts and amperes, you get watts, a unit of power. Watts is equivalent to joules/second. If you multiply volts x amperes x seconds, you get joules.
Power=Volts x Amps Unit for power is watts
Amperes measure the rate of flow of electricity in a conductor Volts measure electrical pressure Watts measure the amount of energy or work that can be done by Amperes and Volts Relationship: Work = Pressure x Flow or Watts = Volts x Amperes When you know two variables you can calculate the other Formulas - This formula referred to as the West Virginia Formula (W - VA)Watts = Volts x Amps Volts = Watts / Amps Amps - Watts / Volts Refer to link below for more information
Amperes Hertz Watts
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
To calculate the total power consumption in watts, you can multiply the current in amperes by the voltage in volts. If the voltage is not known, you cannot directly convert amperes to watts.
To convert BTUs (British Thermal Units) to amperes, you first need to convert BTUs to watts, using the conversion factor where 1 BTU/hour is approximately equal to 0.293071 watts. Then, you can use the formula ( I = \frac{P}{V} ) to find the current in amperes, where ( I ) is the current in amperes, ( P ) is the power in watts, and ( V ) is the voltage in volts. Simply divide the power in watts by the voltage to get the current in amperes.
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
To convert watts to volts, you need to know the current in amperes (A) because the formula is Watts = Volts × Amperes (W = V × A). Without the current value, you cannot directly convert 310 watts to volts. If you have the current, you can rearrange the formula to find volts: Volts = Watts / Amperes. For example, if the current is 10 A, then 310 W would be 31 volts (310 W / 10 A = 31 V).
To answer this question a voltage is needed. 1 HP = 746 Watts. Amps = Watts/Volts.
To convert kilovolts (kV) to watts (W), you need to know the current in amperes (A) as well. The relationship is given by the formula: Power (W) = Voltage (V) × Current (A). Therefore, without the current value, you cannot directly convert 500 kV to watts. If you have the current, you can calculate the power by multiplying 500,000 volts by the current in amperes.
To convert milliamperes (mA) to watts (W), you need to know the voltage (V) in volts that the current is operating at. The formula is: Watts (W) = Volts (V) × Amperes (A). Since 1 mA is equal to 0.001 A, you can convert mA to A and then use the formula: W = V × (mA/1000).
It depends on how many amperes there are. If you have 1 amperes, then you get 260 watts. If you have 260 amperes, then you have 67,600 watts. If you have 0.001 amperes, then you have 0.26 watts. Its just watts = volts times amperes. Of course, the limiting factor is the available power behind the 260 volts, but you did not say anything about that.
It is expressed in Volt-Amperes not Watts.
To determine Watts from Volts, you also need to know the current in Amperes (A) using the formula: Watts = Volts x Amperes. Therefore, 200 Volts alone cannot be converted into Watts without knowing the current. For example, if the current is 10 Amperes, then the power would be 200 Volts x 10 Amperes = 2000 Watts.
Volts X amperes = watts.