In commercial building the exterior block wall is used as a finished surface. If you have electrical or Plumbing needs you can build a stud wall next to the CMU wall. You really don't need to secure it to the Cmu wall as long as there is an adjoining wall to support it or ceiling joists.
Standard block is basically 8" x 16" which is 128 square inches 128/144=0.8888888888888889. The size of the mortar joints will also have a bearing on the overall wall size.
Answer By putting your ear to the wall : A wall is a collection of studs (usually sized 2x4 or 2x6) equally spaced (usually 16 in. or 24 in. on center) and sandwiched between top and bottom plates. : If you start from the corner, you can measure 16" or 24" and hope that you find a stud. You can hit the wall, and where it sounds more hallow, no stud exists where the sound is higher, there is a stud. But if you can't tell a difference, then measuring could be your only bet.
With a stud finder, most studs are on 16 inch center so measure from an outside corner 16 and you should be close. Look for dimples where nails are not completely covered or have popped the finish. Sheetrocked wall, you can tap on the wall and it will sound more solid over the stud.
Yes and half the stud width.
A post in which it holds the jacks against / within the wall framing
Yes, you need an anchor for a stud to securely fasten objects to the wall.
A bee hive in an outside cinder block wall can be sealed. You will need to seal up any and all holes in the cinder block.
Use re-bar and cement.
This mount will only fit onto flat walls as it needs to be attached to a stud, concrete or cinder block. Also, do to its flat shape it will not fit into a corner.
To create a cinder block planter wall in your garden, first, choose a location and layout for the wall. Then, stack the cinder blocks in the desired pattern, making sure they are level and stable. Fill the cavities of the blocks with soil and plant your desired flowers or plants. Water regularly and enjoy your new planter wall!
To install a trellis on a cinder block wall, you can use concrete screws or anchors to attach the trellis securely to the wall. Make sure to drill pilot holes in the cinder blocks before screwing in the screws to prevent cracking. Position the trellis where you want it on the wall and use a level to ensure it is straight before securing it in place.
Use the strips to fasten on the wall, screwing at stud locations. Then fasten the 1 x 12 shelves to the 1 x 3 s.
To properly install cinder block anchors to secure heavy objects to a wall, first drill holes into the cinder block using a hammer drill. Insert the anchors into the holes and tighten them with a wrench. Make sure the anchors are rated for the weight of the object you are securing.
To effectively repair a cinder block patch on your wall, you can start by cleaning the area thoroughly and removing any loose debris. Then, apply a bonding agent to the patch area before filling it with a cinder block patching compound. Smooth out the compound and let it dry completely before painting or sealing the repaired area for a finished look.
The best methods for installing shelves on a cinder block wall are to use concrete anchors or screws specifically designed for masonry walls. Pre-drill holes in the cinder blocks, insert the anchors or screws, and then attach the shelves securely to the wall. Make sure to use a level to ensure the shelves are straight and properly aligned.
Some creative ways to decorate a painted cinder block wall include hanging artwork or mirrors, installing shelves for plants or decor, using adhesive wall decals or wallpaper, creating a gallery wall with framed photos or prints, or adding a tapestry or fabric wall hanging for texture.
To ensure your cinder block wall is waterproof, you can apply a waterproofing sealant or membrane to the surface. This will help prevent water from seeping through the blocks and causing damage. Additionally, make sure to address any cracks or gaps in the wall to further enhance its waterproofing capabilities.