You need a step up transformer unfortunately. Buy an Ugly's book electrical reference book. They're great and there is a transformer chart in there that will list the proper size or Kva that you will need according to your amperage need.
if you drove the 18V winding with 230V the transformer would burn out, if it didn't catch fire first
I depends on what you are connecting to it but you only need 1 of the phases providing you can get to a neutral
Assuming that this question is about adapters for traveling to another country (not USA) then 230V is the equivalent of 220V. Just purchase a suitable adapter.
Typically single phase motors go up to 10hp. Wouldn't be very efficient at about 100 amps. A 20hp 3 phase motor at 230v pulls 52 amps. The 10hp single phase 230v pulls 50 amps.
Yes, if the diodes that the bridge rectifier are rated for 230V in forward and reverse voltages. Normally you can do a search for the part number on the internet and get specs there.
no it does not in a way it does it depends on the device and how it is setup. Most today devices need diffrent amount of power for what they are doing if at one moment a device is needing only 12V to operate but the next minute it may need 208V just an example it depends if they device can control the amount of power it consumes however if the device is capaple and wants to use 230V then it will.
In the supply industry it refers to circuits of below 1000 volts. Common voltages used are 120v, 208v, 230v, 240v, 277v, 400v, 415v, 480v.
no 208v is bigger
The main difference between 208V and 220V is the voltage level itself. 208V is a three-phase voltage common in commercial and industrial settings, while 220V is a single-phase voltage commonly used in residential applications. The difference in voltage can impact the performance of electrical equipment designed for specific voltage inputs.
it will not run
No bell wire is not meant to be 230V.
if you drove the 18V winding with 230V the transformer would burn out, if it didn't catch fire first
It is not recommended to connect a 240V ballast to a 208V line service as this can potentially damage the ballast and create a safety hazard. It is best to use a ballast that is specifically designed for use with a 208V line service to ensure safe and proper operation.
connect the Red Yellow blue phases
He dies.
I depends on what you are connecting to it but you only need 1 of the phases providing you can get to a neutral
Its on the specifications of the device you will plug