answersLogoWhite

0

What else can I help you with?

Related Questions

What is the full form of CT PT transformer?

CT=========current transformer PT=========potential transformer these are the instrumental transformers.


When operating a no load tap changer on a transformer what should be done first?

First isolate the transformer


What is the difference between CT and PT?

A ct is a step up transformer where as a pt is a step down transformer because both are used for measurement and protection purpose . current is stepped down if the secondary windings are more so we can obviously say thar ct is step up transformer


What is the difference between Ohms and Ohms CT in impedance of an audio transformer?

The difference in between Ohms and Ohms CT is that in Ohms CT it has CT at the end.


Is ct step up or step down?

'CT' is used to designate current transformers, and 'PT' is used to designate potential transformers. A current transformer provides a ratio of primary current to the secondary. A potential transformer provides a ratio of primary voltage to the secondary. A power transformer (step up or step down) resembles a PT more than a CT.


Will REF protect the outgoing cables when the Ct's are fitted at the transformer?

REF protection, when installed and set correctly, will protect everything within the CT's. If the CTs are on breakers, then yes, the cables from the transformer to the breakers will be in the zone of protection. If the CTs used are in the bushings of the transformer, then no.


What are the precautions using current transformer and potential transformer?

Secondry of CT should never kept open during functioning


What is the main function of a current transformer in switchyard substation?

use of CT


What is CT operated electronic relay?

CT (Current Transformer ) is essential whether is electronic relay or electromagnetic relay. A relay requires the CT to sense the line current.


What is the name of the device that changes the ratio of a current in voltage?

A transformer. it steps up / down voltage, and steps down / up current.


What is the advantage of 1 amps current transformer than that of the old type 5 amps current transformer?

If the protection relay and CT installed for away, then it is advised to install 1A CT rather than 5A CT. Because of lower amps it will reduce the losses on the cable. p = i^2.R


What r the primary to secondary turns ratio in the isolation transformer?

a: 1:1 ratio its only purpose is to isolate