answersLogoWhite

0

To read an engineer's spirit level, place it on the surface you want to check for levelness. Observe the bubble inside the vial; it should be centered between the marked lines for the surface to be perfectly level. If the bubble is off-center, it indicates the surface is inclined in the direction the bubble is moving. Adjust the surface until the bubble is centered for accurate leveling.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

How do you use an engineers precision level?

If you mean a 'spirit level' then when the line is in the center of the bubble then the object being measured is horizontal to the ground.


How do you use engineers spirit level?

Ensure the surface to be tested, and the level itself, are clean so bits of swarf etc don't prop the level's end up and give false readings. Ensure the alignment of the level is true along the direction to be tested. Read the level then rotate it 180º to obviate or show any errors in the level.


How do you calibrate spirit level?

To calibrate a spirit level, place it on a flat and stable surface. Check if the bubble is centered, then flip the level and check it again. If the bubble doesn't center in both positions, adjust the screws or nuts on the level until it does.


What is the use of a spirit level?

Use of a spirit level is to find out if things are level.


How do you read a surveying leveling rod?

it is read in tenths of a foot, engineers scale


A spirit level tells if things?

A spirit level tells if things are level, horizotally or vertically.


When was The Spirit Level - poetry - created?

The Spirit Level - poetry - was created in 1996.


How do you level a dumpy level?

it is a spirit level


What is the maximum spirit level in yu gi oh gx spirit caller?

level 3, i activated AR code for max spirit level and they all turned to level 3


Uses of aluminum spirit level?

A spirit level tells if things are horizontal or vertical


How do you use dumpy level to find the relative heights?

Dumpy level provides a horizontal line (parallel to earth's curvature); you can read the scale by holding it normal to the ground level. Take separate readings for separate points then compare them


Who uses a trowel and a spirit level?

im not so sure about the spirit level but a botanist