0
What else can I help you with?
What is the purpose of a Cable tester?
A cable tester is used to test the electrical connections in a cable or other wired device. There are two ways to test for a connection: continuity test and resistance test. A cable tester can also test for a short by determining voltage.
What is varley loop test?
A varley loop test is a test used to find the earth fault location in an underground cable. It uses the Wheatstone bridge to help determine the distance from the test point to a fault in a telephone or telegraph line or cable.
What is the g in a megger test?
It is the terminal on the megger that the ground cable connect to when testing a device to ground.
Advantages of LAN or WLAN?
LAN is wired WLAN is wireless
Using blavier test to check for cable faults?
This is use to locate the ground fault of a single cable. This test is performed with the aid of a low voltage supply with an ammeter or voltmeter. In this test the resistance between one end of the cable C1 and the earth is first measured with the other end, C2 isolated to earth and then with the C2 earthed. Let the two readings be represented by R1 and R2 rep! If r1 and r2 are the conductor resistance of the length of cable at C2 to fault and at C1 to fault rep!, and "r" is the resistance of the fault to earth
How can you test a rj 45 cable?
A) Lan Cable Meter B) Multimeter C) Plug it into a PC or laptop and try to connect to the internet
Which type of Ethernet cable to be used for LAN setup?
It depends on the type of LAN; the most common cable in a LAN is UTP cable. In older LAN types you could also use coaxial copper cable. For UTP cable that would be Cat 5, cat 5E or above for most LANs.
What is LAN cable?
LAN cables help in transferring and receiving data
How was using the cable in LAN how long cable is used and which cable?
Cat5 is the standard.
Is a LAN 100 cable an Ethernet cable?
Yes, it's.
Why is your lan light orange instead of green?
If it was green before and turned orange it means you have problems with your wired connection. It can be as simple as unplugging and plugging the cable. And as bad as that the NIC went dead. Start with testing the card using ping 127.0.0.1. It will test your NIC. Then test the card on another end of the cable and test cable.
How do you use a utp cable tester?
there is lan tester available in the market, we have to connect one side of the crimped cable to one of the part of lan tester and the other side crimped cable had to be enter the other part of the lan tester... then we have to on the lan tester and we are able to visible LED's blinking one after the other , if not ther is a problem in crimping the cable..
Where to purchase a lan cable?
Most countries have computer/electronic shops in towns and cities, where a LAN cable can be bought. Or order off ebay or Amazon.
Can twisted pair cable used for LAN connections?
twisted pair cable can used as LAN connections....for example CAT5 and CAT6 both twisted pairs.
What does LAN mean on a cable box?
A LAN is a "Local Area Network". Your cable box is providing one or more Ethernet ports by means of which you can access the Internet.
How do you share file between two laptop by LAN cable?
Use a crossover cable.
How can you connect your PS3 to your PC?
With a LAN cable and a switch
