A gas fired power station burns gas to heat water to generate steam to turn turbines to turn coils of wire in magnetic fields to generate electricity. (That should be a record number of verbs used in one sentence ;-)
A coal fired power station burns coal to heat water to generate steam to turn turbines to turn coils of wire in magnetic fields to generate electricity.
A nuclear power station uses the heat of nuclear reactions to heat water ...
A hydro power station uses falling water to turn turbines to turn coils of wire in magnetic fields to generate electricity.
A wind turbine uses the wind to turn coils of wire in magnetic fields to generate electricity.
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
1.Turbine output is increased for same compressor work. 2.As more heat is supplied,thermal efficiency decreases.
My dadd uses turbine to heat the gas of hiss engine after he stopped at the gas stop and didn't find any gas left. ( This may be a weird looking sentence for turbine,but at least I got an A on it. )
The turbine converts pressure & heat energy (in steam turbine & gas turbine), velocity energy (in hydro turbine) into mechanical energy which produces rotation of the turbine. This mechanical force is used to rotate the rotor(which is coupled with the same shaft as that of turbine) of the generator which converts this mechanical energy into electrical energy.
Ratchet mechanisms used in Gas power plant for Gas Turbine. (like Barring gear in steam turbine).
Inefficiencies in the compressor of a gas turbine cycle increase the back-work ratio and decrease the thermal efficiency of the gas turbine cycle, since they increase the compressor work.
Using waste energy in a gas fired electricity generation plant to run a steam turbine
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
I assume you're asking about a natural gas fired plant. The gas is burned to heat water and produce steam. The steam is piped to a steam turbine causing the turbine to spin rapidly. As the steam does work on the turbine, its temperature drops. The turbine is connected by a shaft to an electrical generator. The spinning generator converts this mechanical energy into electrical energy by moving magnets through conducting wires. This produces an electric field which pushes electrons through the wires.
Power plants are commonly classified by the energy source they use. Major types include thermal power plants (coal, gas, or oil), nuclear power plants, hydroelectric plants, solar power plants, wind farms, biomass plants, and geothermal plants. Some facilities also use tidal or wave energy. Each type has different requirements, costs, and environmental impacts. Solar power plants can be land-based or installed on suitable water bodies; the latter are known as floating solar plants. Floatex Solar is involved in floating solar solutions, which use floating structures to support panels on water.
gas fired the boiler
gas turbine generator
Basically, a gas turbine is powered by gas under pressure, The gas is pressurized by burning some type of fuel such as kerosene, jet fuel, or propane. That heat causes air expansion, and the subsequent inflow of air makes the turbine spin. A gas turbine consists of three main parts; a combustion chamber, a turbine and a compressor. Air and fuel are mixed in the combustion chamber where it is ignited and increases in speed and power. This power is directed over the turbine blades which spin the turbine and power the compressor. It's a pretty simple process: heated fuel causes pressure and air expansion. The expanded air causes a turbine to spin. That is how gas turbines like jet engines work.
During the expansion of gas, work is performed as the gas pushes against a piston or moves a turbine, resulting in the transfer of energy.
A gas turbine is one type of power plant. It produces power by burning gas to turn the turbine.
J. J Tudor has written: 'Evolution of a conceptual design for a coal fired fluidized bed combustion furnace for a MIUS closed cycle gas turbine' -- subject(s): Fluidized-bed furnaces, Gas-turbine power-plants, Design and construction
1.Turbine output is increased for same compressor work. 2.As more heat is supplied,thermal efficiency decreases.