0
What else can I help you with?
What is In-Die Tapping?
In-die tapping is the process of tapping stamped parts in a progressive die while in a punch press. In-die tapping eliminates the need for a secondary tapping operation of stamped parts.
Difine what is fixed tapped resistor?
This is usually a resistance wire wound resistor that has a physical connection on the body of the resistor called a tap. It about the same as tapping a water line to attached a hose line to your icemaker.
What is used to splice aluminum wire to copper wire?
Yes, but you have to use connectors designed for that purpose. Using ordinary wire nuts could cause a circuit failure due to a high resistive junction.
What are tapping fumes in submerged arc furnace?
Tapping in the furnace means " Taking out the liquid metal/ferro alloy" . It is a cyclic event.
What is the difference between earthing boss and earthing lug and where to use?
An earthing boss and earthing lug are parts of a grounding connection. An earthing boss is in a casting that allows for the drilling and tapping of hole. A earthing lug is used to bond a wire to the ground.
In what instances can wire tapping be done?
when police are investigating and have a warrent
Should wire tapping be allowed?
Yes
Instances can wire tapping be done?
There are two types of wiretaps legal and illegal. An illegal wire tap can be done at any time by anyone in violation of several laws. A legal wiretap can be done once a court authorizes the wiretap to be performed by or at the request of law enforcement. The exception to this may be secret wiretaps placed by intelligence agencies to thwart terrorism.
Two methods of active wire tapping are between lines transmission and?
piggyback entry
What is the effect of tapping the wire against the tube?
Tapping the wire against the tube can disrupt any debris or material buildup on the wire, helping to clean it and potentially improve conductivity. It can also help dislodge any trapped air bubbles, enhancing the flow of liquid or gas through the tube.
Why is phone tapping good?
Phone tapping may be good if done for the right reasons. The government may tap phone calls in order to prevent security threats from being carried out.
How wire transfer is done?
How a wire transfer is done? Can the person be traced through a receipt?
Where is the coolant sensor on a 2001 Ford Taurus?
Check around the reservior for a wire harness going to there. Try tapping on it.
When I turn key off blower motor does not com back on unless I tap on heater box?
There is a loose wire somewhere in the circuit - tapping the heater makes the wire complete the circuit !
What has the author Helmut Greulich written?
Helmut Greulich has written: 'Spion in der Streichholzschachtel' -- subject(s): Eavesdropping, Wire-tapping
What has the author Morton J Robbins written?
Morton Bromfield has written: 'The hidden politics of the wire tapping industry' -- subject(s): Privacy, Right of, Right of Privacy, Wiretapping 'The wire-tapping of Washington' -- subject(s): Privacy, Right of, Right of Privacy, Wiretapping
What is rubber tapping and what dose it have to do with making rubber?
Rubber TappingTapping is done by wounding the bark of the rubber trees. It is done by making a cut at between one and a half metres from the ground at an angle of about 30° to the horizontal. The cut is about 2 mm. deep. It is made in such a way as to sever the latex tube but not to damage cambian - a paper like skin between the bark and the wood. When the liquid latex flows out, it is collected in vessels. Tapping of the trees is usually done on alternate days. Tapping starts before six in the morning, and the collection of latex is completely before noon. Tapping work is done generally by hand. It is very laborious job and requires considerable skill. There are several tapping system practised in Malaysia, but the most popular is a "Sloping Cut" made half way round the circumference of the tree.
