0
What else can I help you with?
What is a substructure?
•The lowest portion of the building structure.Usually located below the ground level. •A foundation is a part of the structure which is in direct contact with the ground to which the loads are transmitted.
Why should you privide plinth beam?
A plinth beam is essential in construction as it helps distribute loads from the superstructure to the foundation, providing stability and preventing differential settlement. It also acts as a structural tie that enhances the integrity of the building by resisting lateral forces, such as those from wind or seismic activity. Additionally, plinth beams can help prevent moisture ingress and improve overall durability by elevating the structure above ground level.
What is passive satellite?
A satellite that simply reflects light or radio waves transmitted from one ground station to another without any amplification or retransmission.
What is the best type of ground to put a building on?
Firm ground not suffering from shrinkage or expansion. Rock is the firmest. Sandy ground will require piled foundations. Clay will require investigation into shrinkage with the seasons. Avoid building near tall trees - especially poplars that have large root networks that can affect the foundations over time.
A 24-foot ladder is placed against a vertical wall of a building with the bottom of the ladder standing on level ground 22 feet from the basse of the building?
56
What is a substructure?
•The lowest portion of the building structure.Usually located below the ground level. •A foundation is a part of the structure which is in direct contact with the ground to which the loads are transmitted.
What is Different between superstructure and infrastructure?
Infastructure is usually applied to an indemic installation such as a telephone network across a county of perhaps a road system. A superstructure is generally the framework of a single item such as an oil rig
What is a tall building equipped with machinery for loading cleaning mixing and storing grains?
A grain elevator is a tall building equipped with machinery for loading cleaning mixing and storing grains. It scoops up the grain from the ground level and carries it up to a higher level for storage.
What is the part of a constructed work that supports the superstructure is called?
The part of a constructed work that supports the superstructure is called the foundation. It serves as the base upon which the rest of the structure is built, providing stability and distributing loads to the ground below.
Something that acts as a shock absorber for a building during an earthquake is called a(n)?
Something that acts as a shock absorber for a building during an earthquake is called a base isolator. Base isolators are designed to decouple the building from ground motion, allowing it to move more freely and reducing the forces transmitted to the structure. This technology helps protect the building and its occupants from the damaging effects of seismic activity.
Why building foundation have large horizontal area of contact with the ground?
this is because when the area of contact between the ground and the building increases the pressure exerted by the building will be less for the same force.
How can the type of ground beneath a building affect the building's response to seismic?
It can affect the strength, durability, or the sturdiness of the building. If the ground beneath it is sand, It is more than likely to fall during an earthquake or something. Sand is a horrible foundation for a building. Loose soil can also affect the building in the same way, making it slide or sink into the ground.
What do you call the support of a building that is usually constructed below ground level?
The support of a building that's usually constructed below ground level is called a basement. Sometimes it is also the "Base" contruction of a building.
What is ground area?
Ground area is defined as the area a building occupies at ground level. The area is computed based on the exterior dimensions of the ground.
Is there a risk of hot/ground reverse in the electrical wiring of this building?
Yes, there is a risk of hot/ground reverse in the electrical wiring of this building, which can pose a safety hazard.
How does the base isolation system work?
This is when a building is separated from the ground that it is built on by large plates. One plate is secured to the ground and the other is secured to the bottom of the building. These plates move a certain distance when the ground shakes.
Why does building foundations have a large horizontal area of contact with the ground?
Building foundations have a large horizontal area of contact with the ground to distribute the weight of the structure evenly and prevent it from sinking or tilting. This helps to provide stability and support for the entire building. The larger the contact area, the more effectively the weight of the building can be spread out, reducing the risk of structural failure.
