answersLogoWhite

0

What else can I help you with?

Related Questions

How many amps can a 100 KVA transformer carry?

A 100kVA transformer is rated for...100kVA. That is its' power rating, and it is based off the current that is flowing through the transformer (the I^2*R losses are the limiting factor). This can be 80kW and 60 kVARs, or 100kW and 0 kVARs, or 100kVARs, or anywhere inbetween.Another AnswerThe 'power' rating of a transformer is the product of its secondary voltage and its secondary current, expressed in volt amperes or multiples thereof. It's not expressed in watts, because to know the 'true power' of the transformer, the manufacturer will need to know the power factor of the load, and that could vary considerably. Incidentally, the symbol for kilovolt ampere is 'kV.A', not 'kVa'.


What is the ampere range value of transformer?

This typically has to do with how many amps you can safely pull from the secondary of the transformer.


How many amps will a 0.25 kilo volt amp transformer at 120 volts put out?

2.083 amps


How many amps can you get from a 500Kva transformer?

The amps you can get from a 500 kVA transformer would depend on the voltage of the transformer's output. To calculate amperage, you can use the formula: Amps = Power (kVA) / Voltage. For example, if the output voltage is 480V, you would get approximately 1041 amps (500 kVA / 480V).


Unanswered questions-how many amps for a 500KVA transformer.?

To determine the amps for a 500 kVA transformer, you can use the formula: Amps = kVA × 1000 / (Voltage). For example, at a standard voltage of 480V, the calculation would be 500,000 VA / 480V, which equals approximately 1041.67 amps. The specific current will vary based on the voltage level used with the transformer.


How many amps does a 600 watt low voltage transformer box pull?

The transformer itself does not pull current. Whatever you connect to the transformer pulls current. Whatever the output voltage of the transformer is, divide that into 600 and you get maximum current possible without burning up the transformer. At 24V that's 25 amps.


How many amps will a 10 kva transformer handle?

It depends on how many amps it was designed for. A 12.5kV/600v 10kVA 3 phase transformer can handle ~.5 amps on the primary and ~10A on the secondary. A 600/120V 10kVA 3 phase transformer can handle ~10A on the primary and ~50 on the secondary.


How many amps will a 37.5 KVA transformer carry?

It depends on the rated voltage of its secondary.


7200 volt 25kw transformer how many amps at 240 single phase?

The formula you are looking for is I = W/E. Amps = Watts/Volts.


How many amps will a 250 kVA transformer in 220 volts secondary?

To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.


How many amps do you need to supply a 150kva transformer to get 118amps 480 volts?

Rephrase your question, as it doesn't make any sense. If the primary side of the transformer is 480 volts 3 phase, this transformer can be supplied from a breaker as big as 180 amps. If 480 volts 3 phase is your secondary then you can supply up to 180 amps to your loads.


How many amps does a 3 kva transformer draw?

The primary current of a transformer depends upon the secondary current which, in turn, depends upon the load supplied by the transformer. There is not enough information in the question to determine the rated primary and secondary currents of the transformer.