http://www.apogeerockets.com/technical_publication_16.asp.
best of luck! :]
You use fins and a nose cone on a bottle rocket because the cone reduces the drag on the rocket, and the fins help stabilize the rocket.
You use a Launch Lug, Parachute, Removable Solid Rocket Engine, Parachute Lines, Fins, Body Tubes, Nose Cone Payload (removable), Engine Mount (fixed), Shock cord, and Recovery Wadding.
That will depend on the degree of the damage to the fins. If some of the fins are slightly bent there should be no problem at all. On the other hand if several of the fins are broken off the cooling will probably not be adequate, Is the microprocessor's internal temperature sensor reporting an unusually high temperature (this is the easiest way to tell if cooling is working right or not)?
this is totally a personal preference. i love my very short FORCE FINS but others love their very long freeDiving fins. many factors influence a person fin preference because of individuals swimming preference, FORCE FINS use more of the calf muscle similar to short bicycle strokes, whereas a paif of long freeDiving fins use more of the whole leg. if you ask me; FORCE FINS if you ask my dive buddy: Apollo Bio-fins somebody else; a completely different answer in general though, universally; the SCUBAPRO JET FINS is the most powerful fin
Aluminum or copper.
the best fins for a bottle rocket is having four fins located at the bottom of your bottle rocket the shape of long triangles ! ! ! :) hope it helps !
You use fins and a nose cone on a bottle rocket because the cone reduces the drag on the rocket, and the fins help stabilize the rocket.
Yes as it control the dirctions of the rocket.
3
Yes, the size of the fins on an AA bottle rocket does matter. Larger fins can provide more stability and control during flight, helping the rocket maintain a straight trajectory. However, if the fins are too large, they can create excessive drag, which may hinder the rocket's performance. Ideally, fin size should be balanced to optimize stability without significantly increasing drag.
A water rocket should probably have three to four fins.
Bottle rockets have fins to provide stability during flight. The fins help keep the rocket flying straight by preventing it from tilting or spinning, which can affect its trajectory. This design allows the rocket to travel in a more controlled manner.
3 are sufficient. Adding more will just create atmospheric drag and slow the rocket down.
Fins are used to help keep a rocket stable. The only way to find out if more fins will make it more stable is by testing it.
They should be cut into triangles and place perpendicular to the rocket. This will give it greater stability when if flies into the air. Place the narrowest part of the triangle towards the top of the bottle and the widest part towards the bottom.
3 t05 fins
Angle the fins so it spins, like a screwdriver