A LUMEN is a unit of measurement of light. It measures light much the same way. Remember, a foot-candle is how bright the light is one foot away from the source. A lumen is a way of measuring how much light gets to what you want to light! A LUMEN is equal to one foot-candle falling on one square foot of area.
So, if we take your candle and ruler, lets place a book at the opposite end from the candle. We'd have a bit of a light up if we put the book right next to the candle, you know. If that book happens to be one foot by one foot, it's one square foot. Ok, got the math done there. Now, all the light falling on that book, one foot away from your candle equals both…….1 foot candle AND one LUMEN
There is no direct conversion between lumens and watts for LEDs since they are measured differently. However, as a rough estimate, a 60-watt incandescent bulb produces about 800 lumens. For an equivalent LED output, you would typically need an LED bulb with around 800 lumens.
it depends, lumens measures light and watts measure power. check out this article; http://wiki.renderplus.com/?title=Lumens_vs_Watts
From halogen to LED you can divide by 4 to find the equivalent. Therefore an 80 watt LED would do the job.
One lumen makes up 1 ANSI lumen as they both measure the same output of light. ANSI lumens are used exclusively for measuring the output of projectors.
If you have the wattage of the laser you can plug it into a formula X/P=L. Where One lumen is equal to 0.001496 watts (1.496mW) which is Power. X is the number of watts or milliwatt and L is Lumens. So if you have a 1 watt laser you have 668.449 lumens being produced by it.
About 80 lumens per watt of electric power is normal for LEDs.
A good projector will have 2000 or more lumens, but an LED projector will have much less.
There is no direct conversion between lumens and watts for LEDs since they are measured differently. However, as a rough estimate, a 60-watt incandescent bulb produces about 800 lumens. For an equivalent LED output, you would typically need an LED bulb with around 800 lumens.
Currently maximum LED luminous efficiency is about 114 lumens/W, measured at 50mA. Average luminous efficiency is about 104 lumens/W. Ordinary LED light effect is about 60 lumens / W. 18W is about 130 lumens is about 1080 lumens.
100 lumens=1257 candlepower from what I have found
it depends, lumens measures light and watts measure power. check out this article; http://wiki.renderplus.com/?title=Lumens_vs_Watts
161 lumens I believe the above answer to be inaccurate. It depends on the light source. For example: For an incandescent light bulb 1 watt it is approx. 18 Lumens. However most LED's use only about 10% the wattage to produce the same amount of light. So for LED's .1 watt produces 18 Lumens.
From halogen to LED you can divide by 4 to find the equivalent. Therefore an 80 watt LED would do the job.
One lumen makes up 1 ANSI lumen as they both measure the same output of light. ANSI lumens are used exclusively for measuring the output of projectors.
usually lights are measured in lumens
If you have the wattage of the laser you can plug it into a formula X/P=L. Where One lumen is equal to 0.001496 watts (1.496mW) which is Power. X is the number of watts or milliwatt and L is Lumens. So if you have a 1 watt laser you have 668.449 lumens being produced by it.
There is no direct conversion between lumens and watts as they measure different things. Lumens measure the total amount of visible light emitted by a source, while watts measure the amount of energy consumed or produced. The equivalence between lumens and watts depends on the type of light source (i.e., incandescent, LED, etc.) and their efficiency.