0
What else can I help you with?
How many turns in primary winding of a welding machine?
primary winding and secondary winding how this turn.
A single phase transformer has an input voltage of 240v and output voltage of 50v and a rated input power of 4.20kW if their is 1344 windings on the input side how many on the output?
There is (240 / 1344) = 179 milli volts per turn. The output voltage is 50 volts, so 50 / .179 = 280 turns on the secondary.
How you can find out transformer primary and secondary turn?
The primarys are marked with the letter H and the secondary terminals are marked with the letter X. The rest depends on how many phases, single transformer, bank transformes, secondary outputs desired, delta or wye or both, etc..... A: most of the time there are not marked with anything. for a power transformer the primary will offer a resistance of 15 ohms the secondary can be more or less depends on applications
Do transformers use steady magnetic fields to produce an emf in the secondary?
In an AC circuit it is the fluctuation of the sine wave which causes a varying magnetic field which in turn induces a current to flow in the secondary.
How do you calculate the of turn and the secondary voltage of the 15kw transformer?
First of all, transformers are rated in volt amperes, not watts. Secondly, in order to determine a transformer's turns-ration, you need to know its primary and secondary voltage ratings.
If you have a transformer with 140 turns on the primary side and 8 turns on the secondary With 120Vrms across the primary side what is the voltage across the secondary side?
Output from secondary is about 6.8V rms, on no load. On the primary side, you have 140 / 120 = .86 volts per turn. Therefore, on the secondary side you will have 8*.86 = 6.8 volts.
If you have a transformer with 140 turns on the primary side and 8 turns on the secondary. With 120Vrms across the primary side what is the voltage across the secondary side?
Output from secondary is about 6.8V rms, on no load. On the primary side, you have 140 / 120 = .86 volts per turn. Therefore, on the secondary side you will have 8*.86 = 6.8 volts.
What is tranformer turn ratio?
Transformer turn ratio is the ratio between the turns on the primary side and the number of turns on the secondary side. For instance if you have a turn ration of 100:200 the primary side has 100 turns and the secondary side has 200 turns. This will be a step up transformer. 10 volts AC into the primary side will result in 20 volts on the secondary side. There will be a decrease in current but the voltage will increase. The total power into and out of the transformer will be the same minus some losses for resistance in the windings.
How do you compute the turn ratio of 3kva 240 v primary and 200 v secondary side?
200V / 240V 5 / 6
What is the only whale that can turn it's head from side to side?
The beluga whale
How many turns in primary winding of a welding machine?
primary winding and secondary winding how this turn.
How many Australians go to secondary school?
It is compulsory to attend school in Australia until you turn 15, so presumably, everybody attends secondary school for at least a few years.
Are starfish secondary primary tertiary consumers?
No it is a secondary consumer. They eat mussels which in turn eat seaweed.
Is a lobster an secondary consumer in the food chain?
The secondary consumers, such as lobsters, feed on the herbivores. The tertiary consumers, in turn, feed on the secondary consumers, and so on.
Is the starter on a 473 Detroit engine 12 volt or 24 volt?
if the vehicle it is in is a truck i would say 12volt if it is in a bus it is 24volt this is only due to the starter and the direction the starter will turn
How many horizontal face of cube?
there are 6 unless you turn the cube on its side.
Can you start a car with a 12volt cordless battery?
If you are referring to a small 12 volt battery as used in a cordless drill, the answer is no. Those batteries do not have near enough amps to turn over a vehicle engine.
