The torque required to start a motor depends on several factors, including the motor type, its size, load conditions, and friction in the system. Generally, the starting torque must overcome the static friction and inertia of the rotor and any connected load. For precise calculations, one would typically refer to the motor's specifications or perform a detailed analysis of the system's dynamics. If you have specific motor parameters, I can help estimate the required torque.
Party poppers are normally popped with a force applied by a finger. The force required is maybe 10 Newtons.
The torque on a series motor is determined by the square of the armature current and, so, is very large -much larger than that of a shunt motor. Consequently, on starting, with no back-emf being generated, the torque on a series motor can be dangerously high if the machine has no mechanical load.
Torque is a measure of how much a force acting on an object causes that object to rotate. Speed is how fast something is going. Another way to think of this is as how far you can go in a certain amount of time.
200 amphere
It depends on the length of the moment arm, which was not specified. Please restate the question.
Party poppers are normally popped with a force applied by a finger. The force required is maybe 10 Newtons.
The torque on a series motor is determined by the square of the armature current and, so, is very large -much larger than that of a shunt motor. Consequently, on starting, with no back-emf being generated, the torque on a series motor can be dangerously high if the machine has no mechanical load.
Torque is a measure of how much a force acting on an object causes that object to rotate. Speed is how fast something is going. Another way to think of this is as how far you can go in a certain amount of time.
245hp..330lb torque
1/3
depends on the applied load
DC motors can spin at a much faster speed and have higher starting torque.
Torque required is 103 Ft-lbs/140 Nm. Torque specifications can be found here in this PDF for almost all vehicles.
125 hp and 107 ft lbs of torque.
A 150 HP electric motor will have approximately 280 foot pounds of torque output. Torque is used mostly at low speeds to get loads moving.
How much voltage is required for an LCD monitor to start?Read more: How_much_voltage_is_required_for_an_LCD_monitor_to_start
from power= torque*angular speed u can calculate torque and from torque u can find the force if the radius is known.