answersLogoWhite

0

The specific gravity of limestone concrete is 2.37. Therefore 5 gallons of concrete would weigh 94.8 pounds.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

How much concrete does it take to fill a 5 gal pail?

A standard 5-gallon pail has a volume of about 0.019 cubic meters or approximately 0.13 cubic feet. Since concrete typically weighs around 150 pounds per cubic foot, filling a 5-gallon pail would require about 20-25 pounds of concrete, depending on the specific mix and density. This amount is sufficient to fill the pail to the top.


Calculate gallons of asphalt cement in a ton of asphalt?

The answer is, it depends. Different types of bituminous cement concrete (asphalt hot mix) use different percentages of asphalt cement. In Virginia, base mixes use at least 4.4% asphalt, while surface mixes are up to about 6%. Liquid asphalt is a little heavier than water; it weighs about 9.4#/gallon (depending on the source and grade). Here's the math: Base mix 2000#/ton x 4.4%/9.4#/gal. = 9.36 gal/ton surface mix 2000#/ton x 6%/9.4#/gal. = 12.76 gal/ton hope this answers the question.


How much does liquid asphalt weigh per gallon?

Liquid asphalt has a specific gravity range from 0.98 to 1.02. Typically, a specific gravity of 1.0 is used. This can vary with the type of asphalt and the temperature of the asphalt. A specific gravity of 1.0 is the same as water measured at the reference temperature of 60 degrees Fahrenheit. This specific gravity of 1.0 corresponds to a density (or specific weight) of 1 gram per cubic centimeter (1 g/cm3) or 62.4 pounds per cubic foot (62.4 lb/ft3) or 8.34 pounds per gallon (8.34 lb/gal)


What is the gas tank size for a 2007 Acadia?

Acadia fuel capacity is 22 US gal or 83.4 litres


How long does a 100 gal commercial hot water heater last?

Most last about 12-14 years.

Related Questions

How much does a 5 gal bucket of wheel weights weigh?

330lbs


If I have a bucket of water that holds 4 gallons of water and another bucket that holds 7 gallons of water. The buckets have no markings. How can I go to the well and bring back exactly 5 gallons?

Fill the 4 gal bucket and empty it into the 7 gal bucket. Fill the 4 gal bucket and then fill the 7 gal bucket from the 4 gal. This leaves 1 Gallon in the 4 gallon bucket. Empty the 7 gallon bucket and pour the gallon from the 4 gal lbucket into it. Fill the 4 gal bucket and pour it into the 7 gal bucket. You then have 5 gallons in the 7 gallon bucket.


How much does a 5 gal bucket of sand weigh?

A 5-gallon bucket of sand typically weighs around 50 pounds, give or take a few pounds depending on the specific type of sand and moisture content.


How much does liberty herbicide weigh per gal?

9.6 lbs per gal


How much does Gal Mekel weigh?

NBA player Gal Mekel weighs 191 pounds.


How much does 1 gal of gasoline weigh?

8.66 lbs.


How much does a gallon of gramoxone weigh?

9.12 lbs/gal


If 1 gallon gal of water weighs 8.34 pounds how much does 3.75 gal weigh?

31.275


How much does a 55 Gal. drum of lead shot weigh?

55 gallons?


A bucket full with water is pints or gal?

It is both .


How many cubic meter in one bucket?

It depends on the bucket. The typical large bucket like from Home Depot is 5 gallons. 1 cubic meter = 264.17205 gal. or 1 gal. = 0.003785412 m^3 so 5 gal = 0.01892706 m^3 {cubic meters}


How much does 29952 gallons of water weigh?

250,099.2 pounds at 8.35 lbs/gal.