13%
To calculate the amount of cement required for 1 cubic meter of M10 grade concrete, which has a mix ratio of 1:3:6 (Cement: Sand: Aggregate), you can use the following formula. The total parts of the mix are 1 + 3 + 6 = 10 parts. For 1 cubic meter, the volume of cement required is approximately 1/10 of the total volume, which is about 0.1 cubic meters. Given that the density of cement is around 1440 kg/m³, you would need approximately 144 kg of cement for 1 cubic meter of M10 concrete.
For one cubic meter of concrete used in a slab, approximately 0.3 to 0.5 cubic meters of sand is typically required, depending on the specific mix design. A common concrete mix ratio for slabs is 1:2:4 (cement:sand:aggregate), which translates to about 0.4 cubic meters of sand for each cubic meter of concrete. However, the exact amount may vary based on the desired strength and workability of the concrete.
The weight of coarse aggregate required to fill one cubic meter depends on its density, which typically ranges from 1,500 to 2,500 kilograms per cubic meter. Therefore, one cubic meter of coarse aggregate generally weighs between 1.5 to 2.5 tonnes. For example, if using a density of 2,000 kg/m³, one cubic meter would equal 2 tonnes. Always check the specific density of the material being used for accurate calculations.
Type your answer here... 11.2
M20 - 6.20bags
Sand is not a living thing and does not have cubs!
12L
79 UK gallons = 35.9% of one cubic meter.
3
0.2
26 bags
10
1 meter = 10 decimeter 1 cubic meter = 1000 cubic decimeter
Kilogram per cubic meter is the one that doesn't belong. Square meter is meter^2 and cubic meter is meter^3 but kilogram per cubic meter is a density
4.50/bag cement, required for 1 cubic metre of concrete ( M10).
500 number of bricks are required for 1C/m
There are approximately 1.30795 cubic yards in a cubic meter.