0
What else can I help you with?
How much sand and gravel do you need to make 1 cubic metre of concrete?
1 and half tons
How much does 28 cy yards of concrete weigh?
A yard of concrete weighs two tons, so 28 yards is 56 tons.
How much navvy jack is required to make 1 cubic yard of concrete?
To make 1 cubic yard of concrete, you typically need about 1.5 to 2 sacks (94-pound bags) of Portland cement, which is a key ingredient. The amount of navvy jack, or gravel, required can vary based on the desired mix ratio, but generally, you would need around 1.5 cubic yards of gravel. The standard concrete mix ratio is usually 1 part cement, 2 parts sand, and 3 parts gravel. Therefore, the specific quantity of navvy jack will depend on the total volume of aggregates used in the mix.
How much does 1 yard of free-flow concrete cost?
How much is 4.5 yards of concrete in Red Oak TX
How much gravel is needed for a driveway 1780 sq ft 12 inches deep?
You will need 65.93 cubic yards or 84.6 tons of gravel.
How much gravel needed to make a gravel road 180 yards long x 3 feet wide x4 inches deep?
You will need 20 cubic yards or 25.7 tons of gravel.
How much concrete to make a 8 feetx8feetx4inch slab?
0.79 Cubic Yards
How much sand and gravel do you need to make 1 cubic metre of concrete?
1 and half tons
How much gravel is needed to make a 60cm x 60cm x 4.5cm concrete slab?
231
How much concrete was used to make Three Gorges Dam?
5,000,000 cu yards
How much is 3 yards of concrete delivered in Idaho?
How mush is a price of 5 yards of concrete delievered
How much gravel for 25feet by 4feet by1inch?
You will need 0.309 cubic yards (about 600 pounds) of gravel.
How much gravel should be placed under concrete for proper installation?
A minimum of 4 inches of gravel should be placed under concrete for proper installation.
How much gravel do you need?
For a fish tank, you need enough gravel to make a thin layer on the bottom of the aquarium. For an outdoor walkway, you need much more.
How much is 18 yards of gravel in feet?
486 cubic feet
How much cement was used to make the Hoover Dam?
Three and one-quarter million cubic yards. There are 4,360,000 cubic yards of concrete in the dam
How much sand gravel and cement do you need to make 1 cubic yard of concrete?
500 pounds cement, 1500 pounds sand, 1600 pounds gravel. Mix with 32 gallons water
