In order to estimate rcc roof slab you must measure the roof and calculate its area. Then you must contact a professional to see how much slab will be needed.
Slab 15mm
9' by 18' by 4" thick requires at least two cubic yards.
100 TONS
Yes, to calculate the amount of gravel needed for a slab, you can use the formula: Volume = Length × Width × Depth. First, measure the dimensions of the area where the slab will be placed, then convert these measurements into the same unit (e.g., feet or meters). Multiply these dimensions to get the volume in cubic feet or cubic meters. Finally, since gravel is typically sold by the cubic yard, convert the volume from cubic feet or meters to cubic yards by dividing by 27 (for cubic feet) or 1.31 (for cubic meters).
Approximately 12.35 Cubic Yards.
In order to estimate rcc roof slab you must measure the roof and calculate its area. Then you must contact a professional to see how much slab will be needed.
It depends on the depth required
2.15
Because the a slab of snow starts moving down a snow slope.
2
231
14.81 yds
22 cubic yards
At least 28.5 cubic yards for a 6-inch depth.
A 10-foot round slab at 4 inches requires 1 cubic yard.
625 times 0.5 = 312.5 cubic feet will be needed