To increase Young's modulus of shotcrete, you can enhance the mix design by incorporating supplementary cementitious materials like silica fume or fly ash, which improve strength and stiffness. Additionally, optimizing the aggregate size and grading helps achieve better particle packing and reduces voids. Implementing proper curing techniques and ensuring adequate hydration during the curing process can also significantly enhance the material's mechanical properties. Lastly, using high-performance fibers can improve tensile strength and ductility, contributing to an increased Young's modulus.
young modulus remain unaffected ...as it depends on change in length ..
I think you mean "What variables affect young's modulus". Obviously not an english major!
This is known as the Modulus of Elastisity, or Youngs Modulus (in tension/compression) and will be a constant as long as the deformation is in the elastic range.
Heat it up, the modulus will increase from 28 GPa to about 70-80 GPa
en 24 is an alloy steel in the .40 carbon range. Young's modulus between 28 and 30 million PSI Tim Engleman
Young's modulus
Youngs Modulus
75gpa
young modulus remain unaffected ...as it depends on change in length ..
I think you mean "What variables affect young's modulus". Obviously not an english major!
Young's modulus-205 kN/mm2 Poisson's ratio = 0.30
there are different types of modulus it depends on what types of stress is acting on the material if its direct stress then then there is modulus of elasticity,if tis shear stress then its modulus of rigidity and when its volumetric stress it is bulk modulus and so on
Depends on the hardness of the formulation. Poisson's ratio depends mainly on the bulk modulus and slightly on the Youngs modulus at very low strains for the subject compound. If the Youngs modulus lies between 0.92 and 9.40MN/m², Poisson's ratio lies between 0.49930 and 0.49993.
Metal is not a specific material, how is this ever going to be answered?!
G = E/2(1+u) where G = mod of rigidity and u =poisson ration and E = young modulus
The Young's modulus of Teflon (PTFE) is around 500-650 MPa, indicating its stiffness and resistance to deformation under stress.
This is known as the Modulus of Elastisity, or Youngs Modulus (in tension/compression) and will be a constant as long as the deformation is in the elastic range.