Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
The Role of modulation in signal transmission varies because of what type of signal should be modulated.Then how long it should be travel in air.All these points are considered, when we go before modulation.Suppose we are transmitting vedio signal means it should be only Amplitude Modulated signal.If we transmitting audio signal means it should be Frequency Modulated Signals.So the Role of the modulation is varies in signal transmission.
Need for modulation: 1. Length of the antenna for a transmitter is inversly proportional to the frequency of the signal to be transmitted. So we try shift the frequency of the singal for the transmission to higher frequencies. 2. Every transmission of signal in a bandwidth is assigned with a particular frequency which is attained by modulating the signal with the carrier frequency. Different modulation techniques are implemented according to the requirements and compatibilities
CW Radar or Continues Wave Radar uses a constant transmission and is usually used for angle only tracking and can be combined with a second emission that is pulses or swept to deuce range using and separate antenna (or on a time schedule in some cases). The CW part of a CW Radar reference to the transition duty Ratio and because Dead and Listen time are over lapped they normally have two antennas. FM CW Radar or Frequency Modulated Continues Wave Radar, is similar to the CW set up but the Carrier Radio Frequency is swept, when processed this data can produce range data. Again the Dead and Listen time our overlapped and it is normal for separated antenna to be used. The Frequency sweep is repeated in successive management ion different angles Pulsed Radar Transmits a short pulse rather then continuously like the FMCW Radar or CW Radar and has a short Dead time and long listen time During the dead time when the transmission pulse is emitted the receiver is blanked to protect it, After the pulse has completed transmission the receiver is opened to receive the returns. This means that the receiver and transmission times are mutually exclusive and therefore the same antenna can used for both jobs. As the pulse is short the transmission peak power maybe higher then the CW Power but is present for less time. A Hybrid Radar is ICW or Interrupted Continues Wave (some times called Interrupted Carrier Wave) which is really a pulse radar with a high duty cycle.
as it is most affected by arc resistance....
Frequency modulation is not used for long distance transmission because it has the problem of limited band width.
Pulse-modulation
An electric current that is varied to represent information is called a modulated current. This modulation can take various forms, such as amplitude modulation (AM), frequency modulation (FM), or pulse modulation, and is commonly used in telecommunications to transmit data over long distances efficiently.
The Role of modulation in signal transmission varies because of what type of signal should be modulated.Then how long it should be travel in air.All these points are considered, when we go before modulation.Suppose we are transmitting vedio signal means it should be only Amplitude Modulated signal.If we transmitting audio signal means it should be Frequency Modulated Signals.So the Role of the modulation is varies in signal transmission.
Need for modulation: 1. Length of the antenna for a transmitter is inversly proportional to the frequency of the signal to be transmitted. So we try shift the frequency of the singal for the transmission to higher frequencies. 2. Every transmission of signal in a bandwidth is assigned with a particular frequency which is attained by modulating the signal with the carrier frequency. Different modulation techniques are implemented according to the requirements and compatibilities
example of analog modulation
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
1)digital modulation can easily detect and correct the noise. where as analog modulation has little complexity 2)security is more in digital modulation 3)digital modulated signal can traverse a long distance compared to analog modulation
modulation is necessary for transmitting low frequency signal to long range with desired qualitative information
Modulation is the process of varying a carrier signal's properties, such as amplitude, frequency, or phase, to encode information for transmission. In communication systems, modulation is used to efficiently transmit data over long distances by converting the information into a form that can be carried by the carrier signal. Two examples of how modulation is utilized in modern technology are: In Wi-Fi technology, modulation techniques like Quadrature Amplitude Modulation (QAM) are used to encode digital data into radio waves for wireless communication between devices. In digital television broadcasting, modulation methods such as Vestigial Sideband Modulation (VSB) are employed to transmit audio and video signals over the airwaves for high-quality TV reception.
Modulation is any of several means of encoding an information carrying signal onto a carrier of fixed frequency. The purpose is to allow the information to be transported long distances.
This refers to the concept of modulation, where a carrier wave's strength or characteristics are modified to convey information. Modulation techniques include amplitude modulation (AM), frequency modulation (FM), and phase modulation (PM). These techniques are commonly used in telecommunications for transmitting signals over long distances.