0
What else can I help you with?
Which is the difference between a level valve and level control valve?
The purpose of both the valves is same - that to maintain a certain level(in a vessel or tank...) Simple Level valve could be referred to an ON - OFF valve where as control valve could be referred to an analog type of valve. On - OFF valve is for a crude control of level, while control valve is used where a fine level control is needed.
Can you install pressure regulating valve upside down?
no
Define Double regulating valve?
Double Regulating Valve normally have five functions. 1.Presetting 2.Measuring 3.Isolating 4.Filling 5.Draining
What is the difference between a globe valve and a ball valve?
The Globe valves are generally used to control the flow rate and ball valve used for open /close purpose only.A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body.A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it.
What is the difference between a control valve and a gate valve in a stand pipe system?
a gate valve is a one way totally open or closed valve, a control valve is a variable valve.
When water-cooled condenser cycles off the regulating valve should?
When a system with a water-cooled condenser cycles off, the water regulating valve should
When water cooled condenser cycles off the regulating valve should?
When a system with a water-cooled condenser cycles off, the water regulating valve should
Explain how to flush impurities from a water regulating valve that is on a water cooled condenser?
To flush impurities from a water regulating valve on a water-cooled condenser, first, isolate the valve from the water source by closing the necessary isolation valves. Next, open the drain valve located downstream of the regulating valve to allow the impurities to be flushed out. It is important to flush the system with clean water to ensure all impurities are removed. Finally, close the drain valve and reopen the isolation valves to resume normal operation.
How does an idle control valve work?
The idle control valve works by regulating the idle speed of the engine. The idle speed of the engine is usually controlled by the engine of the computer.
Is a ball valve a regulating valve?
no
What would one use a thermostatic radiator valve for?
A thermostatic radiator valve is a valve that is connected to the hot water heating system. It can control the room temperature by regulating the amount of water that goes into the radiator. The valve is able to control this by sensing the temperature of the air.
What control the speed of a piston on a pneumatic motor?
The speed of a pneumatic motor is controlled by regulating the flow of intake air with a proportional control valve Paul Berbakov
Which is the difference between a level valve and level control valve?
The purpose of both the valves is same - that to maintain a certain level(in a vessel or tank...) Simple Level valve could be referred to an ON - OFF valve where as control valve could be referred to an analog type of valve. On - OFF valve is for a crude control of level, while control valve is used where a fine level control is needed.
What is a three-cusp valve regulating blood flow?
the tricuspid valve
Were is the heater control valve located on a 1998 olds cuttlas?
Like most cars. The heater control valve is located inside the closed compartment with the heater core and the and the AC condenser. It is a door flap that seperates the heated air from the outside air, or the AC air.
What is a temperature regulating valve?
That would be the thermostat.
What is the three-cusp valve regulating blood flow?
The right AV Valve also known as tricuspid valve
