no
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
When I have to connect copper to lead "D" I usually solder the copper to the lead or wipe a lead joint depending on the diameter To connect copper to cast iron ,.... If there is a hub I caulk the copper directly into the CI with oakum and poured lead (molten) OR one can solder / braze a female adapter fitting and screw the copper into a CI female fitting
m
K copper.
28mm
I am sorry, but can you PLEASE rephrase your question? Can WHAT be used for copper pipe? When? How? Why?
Grooved method? Threads on the end of the pipe? There is no tube or pipe in copper with threads. You can end a copper pipe with a connection that is threaded to accept steel pipe.
It is very easy to damage any copper pipe.
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
Galvanized pipe will be silver/gray color. Copper will be copper. Use a magnet, it'll stick to galvanized pipe but not to copper. Drinking water lines should not be black steel pipe.
Copper pipe was common anywhere in US.
It is probably referring to the type of fitting. A fitting that is soldered to a copper pipe. It is called sweating when you use solder and a torch to connect copper pipe together or attach fittings to copper pipe.
will carbon steel pipe touching copper pipe cause electrolysis in plumbing situations using water.
To fix a copper pipe, you can use a pipe cutter to remove the damaged section, clean the ends of the pipe, and then solder a new piece of copper pipe in place using a propane torch and solder. Be sure to follow proper safety precautions and techniques when working with a torch.
Yes, plastic pipe, PEX, can replace copper anywhere now.
Copper can rust
The standard diameter of an inch and a quarter copper pipe is 1.25 inches.