m
K copper.
The equivalent size of a 10mm copper pipe in PPR (Polypropylene Random Copolymer) pipe is typically 20mm. This is because the internal diameter of PPR pipes is larger than that of copper pipes, due to the thicker wall of PPR. Therefore, when converting sizes, it's important to account for these differences in wall thickness and internal diameter.
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
YOU thread or braze copper pipe Copper tubling you solder, braze, flaire, compression ring, mechincal joints
no
20mm
You shouldn't do this. Where verdigris is thickest is where your copper pipe is going to soon have a pinhole leak. If you paint it, it's much harder to fix in emergency.
The recommended size of copper pipe for a standard residential plumbing system is typically 3/4 inch. This size is commonly used for water supply lines in homes.
Copper tubing comes in several wall thicknesses K thickest L medium and M thin There is also ACR , DWV
K copper.
It means copper tube size. More specifically, the outer diameter (O.D.) of the pipe being referred to is the same O.D. as copper pipe.
If it is a pressure pipe, you would reduce the plastic down to the copper pipes size with reducer fittings and then use one to go to copper. If a waste line and the difference is not too great, you can use a rubber coupling that is the right size on each end and held on with hose clamps.
The equivalent size of a 10mm copper pipe in PPR (Polypropylene Random Copolymer) pipe is typically 20mm. This is because the internal diameter of PPR pipes is larger than that of copper pipes, due to the thicker wall of PPR. Therefore, when converting sizes, it's important to account for these differences in wall thickness and internal diameter.
This depends on the size of the copper pipe and what class it is. For example, copper pipe half inch class 0 and copper pipe class 3 have a wide weight difference because the wall of the class 3 copper pipe is much thicker.
I am sorry, but can you PLEASE rephrase your question? Can WHAT be used for copper pipe? When? How? Why?
To connect a copper propane pipe to a shutoff valve, you will need to use a threaded fitting that matches the size and type of the pipe and valve. Apply pipe dope or Teflon tape to the threads before connecting them. Tighten the fitting securely using a wrench or pliers to create a leak-proof connection.
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting