0
What else can I help you with?
What is the thickest size of copper pipe?
m
What is the recommended size of copper pipe for a standard residential plumbing system, such as 3/4" copper pipe?
The recommended size of copper pipe for a standard residential plumbing system is typically 3/4 inch. This size is commonly used for water supply lines in homes.
What does cts mean in plumbing?
It means copper tube size. More specifically, the outer diameter (O.D.) of the pipe being referred to is the same O.D. as copper pipe.
How do you join a large plastic pipe to a smaller copper pipe?
If it is a pressure pipe, you would reduce the plastic down to the copper pipes size with reducer fittings and then use one to go to copper. If a waste line and the difference is not too great, you can use a rubber coupling that is the right size on each end and held on with hose clamps.
What is the equivalent size of 10mm copper pipe to ppr pipe?
The equivalent size of a 10mm copper pipe in PPR (Polypropylene Random Copolymer) pipe is typically 20mm. This is because the internal diameter of PPR pipes is larger than that of copper pipes, due to the thicker wall of PPR. Therefore, when converting sizes, it's important to account for these differences in wall thickness and internal diameter.
How much does 2 inch round copper pipe weigh per foot?
This depends on the size of the copper pipe and what class it is. For example, copper pipe half inch class 0 and copper pipe class 3 have a wide weight difference because the wall of the class 3 copper pipe is much thicker.
How do you connect copper propane pipe and shutoff valve?
To connect a copper propane pipe to a shutoff valve, you will need to use a threaded fitting that matches the size and type of the pipe and valve. Apply pipe dope or Teflon tape to the threads before connecting them. Tighten the fitting securely using a wrench or pliers to create a leak-proof connection.
What is the size of the hole in Cd's?
15mm (1.5cm).
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
What size wrench for 2003 Chevy suburban oil change?
15mm six point socket or 15mm wrench
What size copper pipe should you use to hook to your thirty gallon electric water heater?
3/4 in. -- but alot of older homes only have 1/2 in. pipe -- so all you can do is use what size you have will be fine
What size it the drain plug on a rover 220?
15mm
