answersLogoWhite

0

What else can I help you with?

Continue Learning about Engineering

What turbine does not require draft tube?

Draft tube is used to increase the pressure from the low turbine exit pressure to the pressure of the surrounding to which the fluid is rejected.Only reaction turbines require a draft tube as there is low pressure at the exit of the turbine,where as in an impulse turbine the pressure at the inlet and the exit is essentially the same, which is above the pressure to which the fluid is rejected and thus it require no draft tube.


Why draft tube is used in francis and kaplan turbine and not in pelton turbine?

The Kaplan turbine is a newer, more revolutionary version of the Francis turbine, which came before it. The draft tube is used so that the turbine does not need to be where the water flow is lowest.


What is the purpose of draft tube in hydraulic turbines?

Draft tube has following purpose :- 1. It makes possible the installation of the turbine above the tail race level without the loss of head. 2. the velocity of water at the runner outlet is very high. By employing a draft tube of increasing cross sectional area, the discharge takes place at a much lower velocity and thus, a part of the kinetic energy that was going as a waste is recovered as a gain in the pressure head, and this increases the efficiency of the turbine. 3.The draft tube prevents the splashing of water coming out of the runner and guides the water to the tail race.


What is the use pressure balancing pipe in the francis hydro turbine?

The pressure balancing pipe in a Francis hydro turbine is designed to equalize pressure differences between various parts of the turbine, particularly between the inlet and the draft tube. This helps to minimize hydraulic forces that could lead to mechanical stress or instability in the turbine components. By maintaining a balanced pressure, the pipe enhances the overall efficiency and reliability of the turbine during operation. Additionally, it aids in reducing cavitation risks and ensures smoother flow transitions within the turbine system.


How you construct a weightless turbine?

Essentially a turbine looks like a jet engine in reverse, where steam, gas, or liquid is forced through at speed or high pressure to turn a central rotor. if we cut one open the turbine looks like a series of fans inside a tube. Each fan from the from of the tube gets progressively smaller pitched blades.In between each moving blade is a static fan blade to redirect the wake of the previous blade section and increase the speed of the turbine rotor.

Related Questions

What turbine does not require draft tube?

Draft tube is used to increase the pressure from the low turbine exit pressure to the pressure of the surrounding to which the fluid is rejected.Only reaction turbines require a draft tube as there is low pressure at the exit of the turbine,where as in an impulse turbine the pressure at the inlet and the exit is essentially the same, which is above the pressure to which the fluid is rejected and thus it require no draft tube.


Why draft tube is used in francis and kaplan turbine and not in pelton turbine?

The Kaplan turbine is a newer, more revolutionary version of the Francis turbine, which came before it. The draft tube is used so that the turbine does not need to be where the water flow is lowest.


What are the types of draft tube?

two types of draft tube 1. conical type-> for low powered units 2. elbow type-> used with most turbine installation


What is a draft tube?

Due to high KE at the exit of reaction turbine, there would be a loss of overall reduction in KE. So to prevent this loss, the draft tube is provided which produces nett effect of increasing the pressure head at the expense of KE. So this helps the effective pressure head to increase between the inlet and exit of reaction turbine.


What is the purpose of draft tube in hydraulic turbines?

Draft tube has following purpose :- 1. It makes possible the installation of the turbine above the tail race level without the loss of head. 2. the velocity of water at the runner outlet is very high. By employing a draft tube of increasing cross sectional area, the discharge takes place at a much lower velocity and thus, a part of the kinetic energy that was going as a waste is recovered as a gain in the pressure head, and this increases the efficiency of the turbine. 3.The draft tube prevents the splashing of water coming out of the runner and guides the water to the tail race.


What draft tube in hydro electric power plant?

This is a water conducting system part which provide the path for out let water of turbine that is called draft tube. Er.C.R.Meena Assistant Director (Tech.)


What is draft tube in hydro electric power plant?

This is a water conducting system part which provide the path for out let water of turbine that is called draft tube. Er.C.R.Meena Assistant Director (Tech.)


What will happen if a uniform cross section draft tube is used instead of a conical draft tube?

In a Reaction turbine,the Draft Tube is used to reduce the exit velocity loss in order to minimize the exit energy loss. The conical Draft tube ensures this as the diverging area ensures a lower velocity at draft tube exit (since acc. to Q = VxA; the continuity principle,an increase in area renders a decrease in velocity) than its entry point ( at runner exit). A straight (uniform c/s draft tube) draft tube will impart no reduction in the magnitude of exit velocity and thus the employment of a draft tube at the runner exit will be futile.


What is impulse line in instrumentation?

the connecting units between an instrument and a process pipe or vessel, the tube is commonly referred to as an impulse tube or impulse line.


What is used To allow pressurized gases To To vent from the crankcase?

Draft tube or pcv system.Draft tube or pcv system.


Use of draft tube in reaction turbine?

1. To reduce velocity/ kinetic energy of water making exit thereby converting kinetic energy to pressure head allowing turbine to be installed above tail pool level. 2. To create negative suction head. 3. Provide added head.


What is the use pressure balancing pipe in the francis hydro turbine?

The pressure balancing pipe in a Francis hydro turbine is designed to equalize pressure differences between various parts of the turbine, particularly between the inlet and the draft tube. This helps to minimize hydraulic forces that could lead to mechanical stress or instability in the turbine components. By maintaining a balanced pressure, the pipe enhances the overall efficiency and reliability of the turbine during operation. Additionally, it aids in reducing cavitation risks and ensures smoother flow transitions within the turbine system.