answersLogoWhite

0

This is a very complicated matter, but as a practical matter the answer is "Yes."

The analysis should be entrusted to an expert in NFPA 70E, OSHA regs, and Arc Flash Hazard Analysis. Arc Flash warning labels alert employees of the dangers they are about to encounter and inform them of the correct PPE.

According to OSHA regional director Richard Terrill, "The employer is required to conduct an assessment in accordance with CFR 1910.132(d)(1). If an arc flash is present, or likely to be present, then the employer must select and require employees to use protective apparel. Employees who conduct the hazard/risk assessment, and select and require their employees to use protective clothing and offer PPE appropriate for the task, as stated in the NFPA 70E, are deemed in compliance with the hazard assessment and equipment selection OSHA standard."

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Engineering

What is the electrical safety symbol and what does it warn about?

The electrical safety symbol is a stylized lightning flash. It warns about the possibility of electric shock, burns, or arc flash.


Does the iPad 3 have a flash?

Flash as in camera? No. Flash as in Flash Player? No


When assessing the level of safety of an electrical appliance which is the most important check visual inspection flash testing earth leakage current minimum acceptable value of insulation resistance?

When assessing the safety of an electrical appliance, a visual inspection is crucial as it helps identify obvious hazards such as damaged cords, exposed wiring, or signs of overheating. While flash testing and measuring insulation resistance are important for ensuring electrical integrity, they may not detect physical damage that could pose immediate risks. Therefore, a thorough visual inspection is often considered the most critical initial step in ensuring safety.


What is flash steam?

Flash steam is the condensation caused by reducing pressure.


What should you do if your kerosene flash is increasing in the column?

By flash, it is assumed you mean the amount flashed in the flash zone after entering a column. If the amount flashed is more than you desire, lower the feed temperature. If the feed is some amount of saturated liquid and vapor, you will want to increase the percentage of liquid fed to the column. This applies to a general distillation column with more flash than desired.If this is a crude oil atmospheric distillation column, and you are getting too much kerosene in a side draw, your cut point probably does not meet the required specification. In this case you will need to adjust your pumparound rates and/or increase the amount of reflux.

Related Questions

What is the Arc flash safety training?

Arc flash safety training is a type of safety training that is designed to educate workers about the hazards of electrical arc flash and how to prevent injuries from occurring. Arc flash is a dangerous electrical explosion that can occur when high electrical currents flow through the air. This explosion produces a bright flash of light, a loud noise, and a blast of heat that can cause severe burns, blindness, and other injuries. During arc flash safety training, workers will learn about the causes of arc flash, how to identify the potential for arc flash in their work environment, and how to protect themselves from arc flash hazards. They will also learn about the personal protective equipment (PPE) that is required to be worn when working with or near electrical equipment, as well as how to properly use and maintain this equipment. Other topics that may be covered in arc flash safety training include emergency response procedures, first aid for electrical burns, and electrical safety regulations and standards.


What is the electrical safety symbol and what does it warn about?

The electrical safety symbol is a stylized lightning flash. It warns about the possibility of electric shock, burns, or arc flash.


What type of software is required to install Flash Slideshow?

The type of software required to install Flash Slideshow would depend on what version of Flash Slideshow is desired by the individual. There are versions compatable with many different systems.


What is the flash panel?

Panels in flash provide the required information and tools that you may need while working on movies.


Why do electrician use goggle safety?

To protect flash burns to the eyes.


Are flash floods life threatening?

Absolutely. Because people receive no warning in a flash flood, they often do not have time to move to safety.


What type of analysis can reveal natural drainage swales in the deset that are subject to flash flooding?

terrain


What type analysis can reveal natural drainage swale in the desert that are subject to flash flooding?

Terrain


Do you have to use flash on a disposable camera?

No, flash is not required on a disposable camera, but it can be used in low light situations to improve the quality of the photo.


Will Adobe ever release Flash for Opera Mini?

It is highly unlikely, since most mobile phones do not have the required hardware to run Flash.


What is the flash point of diesel and petrol, and how does it impact their safety and handling?

The flash point of diesel is typically around 52-96C, while the flash point of petrol is usually around -45C. The flash point is the temperature at which a substance can ignite when exposed to a flame or spark. A higher flash point, like that of diesel, means it is less flammable and safer to handle compared to petrol, which has a lower flash point and is more flammable. This difference in flash points impacts the safety protocols and precautions needed when handling and storing these fuels.


Finding a place to wait is a safety measure during a?

Finding a high place to wait is a safety measure during a flash flood.