0
What else can I help you with?
What is the difference between a control valve and a gate valve in a stand pipe system?
a gate valve is a one way totally open or closed valve, a control valve is a variable valve.
Where is the inlet and outlet of your pressure tank?
A pressure tank for a pump & well potable water system only has one connection. To connect the pump and tank to your house's water inlet, simply connect the tank and pump together with pressure rated pipe, SCH 40 PVC works fine. In that line, cut in a TEE fitting, and from that T, connect the house inlet with a valve to shut the water off.
What can you do to your motor if you drive without a flex pipe?
remove the chatter valve
What is another word for a valve?
plug, tap, gate, pipe, lid
What a npt valve is in a water tank pressure system?
npt, national pipe thread, is a standard for threads on a screw. I (not a plumber) don't believe "npt valve" makes sense , but probably refers to a valve which has npt threading. Yes, a NPT Valve would be a valve with pipe threads as opposed to a sweat valve which has solder connections. There are several other type of piping connections too.
When flushing the toilet the water pipe rattles for 10 second before it stops?
The fill valve needs to be repaired or replaced OR try throttling down on the globe valve
What is the purpose of the inlet valve washer in a plumbing system and how does it contribute to the overall functionality of the system?
The purpose of the inlet valve washer in a plumbing system is to create a watertight seal between the inlet valve and the water supply pipe. This seal prevents water from leaking out of the system and ensures that water flows only when needed, contributing to the overall efficiency and functionality of the plumbing system.
How do you find the water inlet when your house is on a slab?
ANSWER: If you havs a faucet on the front side of the house, directly below it should be a water inlet pipe and shut off valve. Its not always 100% there, but a really good place to start digging. The valve is usually in a 4 inch PVC pipe sticking above the ground, but can be easily covered up. Dig carefully as not to break the inlet pipe and expose the shut off valve at the meter incase you break it.
How do you remove vibration in a 1.5 water pipe having 4bar pressure having automatic inlet valve at the end when this valve is closed huge vibration produced in water line how to remove vibration?
Reduce the closing rate on the valve.
How do you replace the water heater inlet pipe on the intake manifold on a 3800 buick lesabre?
replace the water heater inlet pipe on the intake manifold on a 3800
How do you change the thermostat on a 2003 Chevy Cavalier?
Drain the Cavaliers radiator. Remove the top radiator hose, and the inlet pipe. Take the thermostat out from under the inlet pipe and replace it. Reinstall the pipe and hose, then refill the radiator.
What is the color of inlet pipe of OHSR?
blue
Where purge control valve located on a 2001 Hyundai Sonata?
The purge control valve is on backside of the throttle-body...it looks like a plastic inlet pipe that is missing tubing. There should be a small white/yellowish "cap" blocking the opening of the valve, just inside the inlet entrance. If it is turned-sideways (in constant open position) then you will have difficulty starting your car after filling-up at the pump. I have photos and will try to upload later....
What is the device called that can alternate between the pool skimmer and the vacuum?
I think you are referring to a Jandy valve. The valve diverts water from the main drain to the skimmers. When vacuuming, turn the valve so it is pointing to the skimmer inlet pipe. OR It could also be called a diverter valve located at the bottom of the skimmer depending on the age of the skimmer. k
After close main water valve in front yard.. If I do air pressure test from a cold water tab.. could it detect any water leak on hot water pipe.?
yes, as long as the cold water inlet valve to your water heater is open.
Were is the air control valve on a 96 Subaru legacy?
i have a 97 legacy 2ltr twin turbo and the air control valve on that is to the front of the inlet manifold in the very centre with a vaccum pipe going on to the top of it. the part from my local subaru dealer is 312 euro. hope this helps
What does MIP inlet mean in plumbing?
male iron pipe--relates to a threaded connection--one form of pipe connection
